lkml.org 
[lkml]   [2021]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.14 690/849] mtd: rawnand: arasan: Prevent an unsupported configuration
Date
From: Miquel Raynal <miquel.raynal@bootlin.com>

[ Upstream commit fc9e18f9e987ad46722dad53adab1c12148c213c ]

Under the following conditions:
* after rounding up by 4 the number of bytes to transfer (this is
related to the controller's internal constraints),
* if this (rounded) amount of data is situated beyond the end of the
device,
* and only in NV-DDR mode,
the Arasan NAND controller timeouts.

This currently can happen in a particular helper used when picking
software ECC algorithms. Let's prevent this situation by refusing to use
the NV-DDR interface with software engines.

Fixes: 4edde6031458 ("mtd: rawnand: arasan: Support NV-DDR interface")
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211008163640.1753821-1-miquel.raynal@bootlin.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/mtd/nand/raw/arasan-nand-controller.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 9cbcc698c64d8..53bd10738418b 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -973,6 +973,21 @@ static int anfc_setup_interface(struct nand_chip *chip, int target,
nvddr = nand_get_nvddr_timings(conf);
if (IS_ERR(nvddr))
return PTR_ERR(nvddr);
+
+ /*
+ * The controller only supports data payload requests which are
+ * a multiple of 4. In practice, most data accesses are 4-byte
+ * aligned and this is not an issue. However, rounding up will
+ * simply be refused by the controller if we reached the end of
+ * the device *and* we are using the NV-DDR interface(!). In
+ * this situation, unaligned data requests ending at the device
+ * boundary will confuse the controller and cannot be performed.
+ *
+ * This is something that happens in nand_read_subpage() when
+ * selecting software ECC support and must be avoided.
+ */
+ if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT)
+ return -ENOTSUPP;
} else {
sdr = nand_get_sdr_timings(conf);
if (IS_ERR(sdr))
--
2.33.0


\
 
 \ /
  Last update: 2021-11-16 02:41    [W:1.768 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site