lkml.org 
[lkml]   [2020]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 211/717] platform/x86: mlx-platform: Remove PSU EEPROM from default platform configuration
Date
From: Vadim Pasternak <vadimp@nvidia.com>

[ Upstream commit 2bf5046bdb649908df8bcc0a012c56eee931a9af ]

Remove PSU EEPROM configuration for systems class equipped with
Mellanox chip Spectrum and Celeron CPU - system types MSN2700, MSN2100.
Till now all the systems from this class used few types of power units,
all equipped with EEPROM device with address space two bytes. Thus, all
these devices have been handled by EEPROM driver "24c02".

There is a new requirement is to support power unit replacement by "off
the shelf" device, matching electrical required parameters. Such device
can be equipped with different EEPROM type, which could be one byte
address space addressing or even could be not equipped with EEPROM.
In such case "24c02" will not work.

Fixes: c6acad68e ("platform/mellanox: mlxreg-hotplug: Modify to use a regmap interface")
Fixes: ba814fdd0 ("platform/x86: mlx-platform: Use defines for bus assignment")
Signed-off-by: Vadim Pasternak <vadimp@nvidia.com>
Link: https://lore.kernel.org/r/20201125101056.174708-2-vadimp@nvidia.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/platform/x86/mlx-platform.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/platform/x86/mlx-platform.c b/drivers/platform/x86/mlx-platform.c
index 986ad3dda1c10..623e7f737d4ab 100644
--- a/drivers/platform/x86/mlx-platform.c
+++ b/drivers/platform/x86/mlx-platform.c
@@ -383,15 +383,13 @@ static struct mlxreg_core_data mlxplat_mlxcpld_default_psu_items_data[] = {
.label = "psu1",
.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
.mask = BIT(0),
- .hpdev.brdinfo = &mlxplat_mlxcpld_psu[0],
- .hpdev.nr = MLXPLAT_CPLD_PSU_DEFAULT_NR,
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
},
{
.label = "psu2",
.reg = MLXPLAT_CPLD_LPC_REG_PSU_OFFSET,
.mask = BIT(1),
- .hpdev.brdinfo = &mlxplat_mlxcpld_psu[1],
- .hpdev.nr = MLXPLAT_CPLD_PSU_DEFAULT_NR,
+ .hpdev.nr = MLXPLAT_CPLD_NR_NONE,
},
};

--
2.27.0


\
 
 \ /
  Last update: 2020-12-28 15:12    [W:1.410 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site