lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 440/606] mfd: max77693: Convert to i2c's .probe_new()
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/mfd/max77693.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 7088cb6f9174..aa32e89b6c8e 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -149,9 +149,9 @@ static const struct regmap_config max77693_regmap_haptic_config = {
.max_register = MAX77693_HAPTIC_REG_END,
};

-static int max77693_i2c_probe(struct i2c_client *i2c,
- const struct i2c_device_id *id)
+static int max77693_i2c_probe(struct i2c_client *i2c)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(i2c);
struct max77693_dev *max77693;
unsigned int reg_data;
int ret = 0;
@@ -360,7 +360,7 @@ static struct i2c_driver max77693_i2c_driver = {
.pm = &max77693_pm,
.of_match_table = of_match_ptr(max77693_dt_match),
},
- .probe = max77693_i2c_probe,
+ .probe_new = max77693_i2c_probe,
.remove = max77693_i2c_remove,
.id_table = max77693_i2c_id,
};
--
2.38.1
\
 
 \ /
  Last update: 2022-11-19 00:49    [W:1.980 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site