lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 553/606] regulator: pfuze100-regulator: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    .probe_new() doesn't get the i2c_device_id * parameter, so determine
    that explicitly in the probe function.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/regulator/pfuze100-regulator.c | 6 +++---
    1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
    index d899d6e98fb8..9ab604289b5c 100644
    --- a/drivers/regulator/pfuze100-regulator.c
    +++ b/drivers/regulator/pfuze100-regulator.c
    @@ -683,9 +683,9 @@ static const struct regmap_config pfuze_regmap_config = {
    .cache_type = REGCACHE_RBTREE,
    };

    -static int pfuze100_regulator_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int pfuze100_regulator_probe(struct i2c_client *client)
    {
    + const struct i2c_device_id *id = i2c_client_get_device_id(client);
    struct pfuze_chip *pfuze_chip;
    struct regulator_config config = { };
    int i, ret;
    @@ -847,7 +847,7 @@ static struct i2c_driver pfuze_driver = {
    .name = "pfuze100-regulator",
    .of_match_table = pfuze_dt_ids,
    },
    - .probe = pfuze100_regulator_probe,
    + .probe_new = pfuze100_regulator_probe,
    };
    module_i2c_driver(pfuze_driver);

    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-19 01:01    [W:4.279 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site