lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 186/606] iio: temperature: mlx90632: Convert to i2c's .probe_new()
Date
From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
drivers/iio/temperature/mlx90632.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/temperature/mlx90632.c b/drivers/iio/temperature/mlx90632.c
index f1f5ebc145b1..19e30cfca8a7 100644
--- a/drivers/iio/temperature/mlx90632.c
+++ b/drivers/iio/temperature/mlx90632.c
@@ -1168,9 +1168,9 @@ static int mlx90632_enable_regulator(struct mlx90632_data *data)
return ret;
}

-static int mlx90632_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int mlx90632_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct mlx90632_data *mlx90632;
struct iio_dev *indio_dev;
struct regmap *regmap;
@@ -1337,7 +1337,15 @@ static struct i2c_driver mlx90632_driver = {
.of_match_table = mlx90632_of_match,
.pm = pm_ptr(&mlx90632_pm_ops),
},
+<<<<<<< ours
.probe = mlx90632_probe,
+||||||| base
+ .probe = mlx90632_probe,
+ .remove = mlx90632_remove,
+=======
+ .probe_new = mlx90632_probe,
+ .remove = mlx90632_remove,
+>>>>>>> theirs
.id_table = mlx90632_id,
};
module_i2c_driver(mlx90632_driver);
--
2.38.1
\
 
 \ /
  Last update: 2022-11-19 00:34    [W:1.785 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site