lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 545/606] regulator: lp8755: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    The probe function doesn't make use of the i2c_device_id * parameter so it
    can be trivially converted.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/regulator/lp8755.c | 5 ++---
    1 file changed, 2 insertions(+), 3 deletions(-)

    diff --git a/drivers/regulator/lp8755.c b/drivers/regulator/lp8755.c
    index 31b43426d47c..467dfdcebc91 100644
    --- a/drivers/regulator/lp8755.c
    +++ b/drivers/regulator/lp8755.c
    @@ -357,8 +357,7 @@ static const struct regmap_config lp8755_regmap = {
    .max_register = LP8755_REG_MAX,
    };

    -static int lp8755_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int lp8755_probe(struct i2c_client *client)
    {
    int ret, icnt;
    struct lp8755_chip *pchip;
    @@ -442,7 +441,7 @@ static struct i2c_driver lp8755_i2c_driver = {
    .driver = {
    .name = LP8755_NAME,
    },
    - .probe = lp8755_probe,
    + .probe_new = lp8755_probe,
    .remove = lp8755_remove,
    .id_table = lp8755_id,
    };
    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-19 00:29    [W:2.388 / U:0.084 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site