lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 071/606] iio: cdc: ad7150: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    .probe_new() doesn't get the i2c_device_id * parameter, so determine
    that explicitly in the probe function.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/iio/cdc/ad7150.c | 6 +++---
    1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/drivers/iio/cdc/ad7150.c b/drivers/iio/cdc/ad7150.c
    index 1113745890ca..79aeb0aaea67 100644
    --- a/drivers/iio/cdc/ad7150.c
    +++ b/drivers/iio/cdc/ad7150.c
    @@ -536,9 +536,9 @@ static const struct iio_info ad7150_info_no_irq = {
    .read_raw = &ad7150_read_raw,
    };

    -static int ad7150_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int ad7150_probe(struct i2c_client *client)
    {
    + const struct i2c_device_id *id = i2c_client_get_device_id(client);
    struct ad7150_chip_info *chip;
    struct iio_dev *indio_dev;
    int ret;
    @@ -647,7 +647,7 @@ static struct i2c_driver ad7150_driver = {
    .name = "ad7150",
    .of_match_table = ad7150_of_match,
    },
    - .probe = ad7150_probe,
    + .probe_new = ad7150_probe,
    .id_table = ad7150_id,
    };
    module_i2c_driver(ad7150_driver);
    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-19 01:38    [W:2.745 / U:1.860 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site