lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 134/606] iio: light: opt3001: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    The probe function doesn't make use of the i2c_device_id * parameter so it
    can be trivially converted.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/iio/light/opt3001.c | 5 ++---
    1 file changed, 2 insertions(+), 3 deletions(-)

    diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c
    index a26d1c3f9543..ec4f5c2369c4 100644
    --- a/drivers/iio/light/opt3001.c
    +++ b/drivers/iio/light/opt3001.c
    @@ -735,8 +735,7 @@ static irqreturn_t opt3001_irq(int irq, void *_iio)
    return IRQ_HANDLED;
    }

    -static int opt3001_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int opt3001_probe(struct i2c_client *client)
    {
    struct device *dev = &client->dev;

    @@ -835,7 +834,7 @@ static const struct of_device_id opt3001_of_match[] = {
    MODULE_DEVICE_TABLE(of, opt3001_of_match);

    static struct i2c_driver opt3001_driver = {
    - .probe = opt3001_probe,
    + .probe_new = opt3001_probe,
    .remove = opt3001_remove,
    .id_table = opt3001_id,

    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-19 00:25    [W:4.043 / U:0.352 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site