lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 051/606] iio: accel: bma400: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    .probe_new() doesn't get the i2c_device_id * parameter, so determine
    that explicitly in the probe function.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/iio/accel/bma400_i2c.c | 6 +++---
    1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/drivers/iio/accel/bma400_i2c.c b/drivers/iio/accel/bma400_i2c.c
    index 1ba2a982ea73..688b06dae669 100644
    --- a/drivers/iio/accel/bma400_i2c.c
    +++ b/drivers/iio/accel/bma400_i2c.c
    @@ -13,9 +13,9 @@

    #include "bma400.h"

    -static int bma400_i2c_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int bma400_i2c_probe(struct i2c_client *client)
    {
    + const struct i2c_device_id *id = i2c_client_get_device_id(client);
    struct regmap *regmap;

    regmap = devm_regmap_init_i2c(client, &bma400_regmap_config);
    @@ -44,7 +44,7 @@ static struct i2c_driver bma400_i2c_driver = {
    .name = "bma400",
    .of_match_table = bma400_of_i2c_match,
    },
    - .probe = bma400_i2c_probe,
    + .probe_new = bma400_i2c_probe,
    .id_table = bma400_i2c_ids,
    };

    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-18 23:50    [W:2.392 / U:0.200 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site