lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 453/606] mfd: rk808: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    The probe function doesn't make use of the i2c_device_id * parameter so it
    can be trivially converted.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/mfd/rk808.c | 5 ++---
    1 file changed, 2 insertions(+), 3 deletions(-)

    diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c
    index c9337c1fd748..f44fc3f080a8 100644
    --- a/drivers/mfd/rk808.c
    +++ b/drivers/mfd/rk808.c
    @@ -646,8 +646,7 @@ static const struct of_device_id rk808_of_match[] = {
    };
    MODULE_DEVICE_TABLE(of, rk808_of_match);

    -static int rk808_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int rk808_probe(struct i2c_client *client)
    {
    struct device_node *np = client->dev.of_node;
    struct rk808 *rk808;
    @@ -867,7 +866,7 @@ static struct i2c_driver rk808_i2c_driver = {
    .of_match_table = rk808_of_match,
    .pm = &rk8xx_pm_ops,
    },
    - .probe = rk808_probe,
    + .probe_new = rk808_probe,
    .remove = rk808_remove,
    .shutdown = rk8xx_shutdown,
    };
    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-19 00:56    [W:2.383 / U:1.284 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site