lkml.org 
[lkml]   [2022]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 165/606] iio: pressure: abp060mg: Convert to i2c's .probe_new()
    Date
    From: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

    .probe_new() doesn't get the i2c_device_id * parameter, so determine
    that explicitly in the probe function.

    Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
    ---
    drivers/iio/pressure/abp060mg.c | 6 +++---
    1 file changed, 3 insertions(+), 3 deletions(-)

    diff --git a/drivers/iio/pressure/abp060mg.c b/drivers/iio/pressure/abp060mg.c
    index e1c3bdb371ee..c0140779366a 100644
    --- a/drivers/iio/pressure/abp060mg.c
    +++ b/drivers/iio/pressure/abp060mg.c
    @@ -174,9 +174,9 @@ static void abp060mg_init_device(struct iio_dev *indio_dev, unsigned long id)
    state->offset -= ABP060MG_NUM_COUNTS >> 1;
    }

    -static int abp060mg_probe(struct i2c_client *client,
    - const struct i2c_device_id *id)
    +static int abp060mg_probe(struct i2c_client *client)
    {
    + const struct i2c_device_id *id = i2c_client_get_device_id(client);
    struct iio_dev *indio_dev;
    struct abp_state *state;
    unsigned long cfg_id = id->driver_data;
    @@ -255,7 +255,7 @@ static struct i2c_driver abp060mg_driver = {
    .driver = {
    .name = "abp060mg",
    },
    - .probe = abp060mg_probe,
    + .probe_new = abp060mg_probe,
    .id_table = abp060mg_id_table,
    };
    module_i2c_driver(abp060mg_driver);
    --
    2.38.1
    \
     
     \ /
      Last update: 2022-11-19 00:25    [W:4.030 / U:0.220 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site