lkml.org 
[lkml]   [2021]   [May]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 304/530] pata_ipx4xx_cf: fix IRQ check
Date
From: Sergey Shtylyov <s.shtylyov@omprussia.ru>

[ Upstream commit e379b40cc0f179403ce0b82b7e539f635a568da5 ]

The driver's probe() method is written as if platform_get_irq() returns 0
on error, while actually it returns a negative error code (with all the
other values considered valid IRQs). Rewrite the driver's IRQ checking
code to pass the positive IRQ #s to ata_host_activate(), propagate errors
upstream, and treat IRQ0 as error, returning -EINVAL, as the libata code
treats 0 as an indication that polling should be used anyway...

Fixes: 0df0d0a0ea9f ("[libata] ARM: add ixp4xx PATA driver")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/ata/pata_ixp4xx_cf.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index d1644a8ef9fa..abc0e87ca1a8 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -165,8 +165,12 @@ static int ixp4xx_pata_probe(struct platform_device *pdev)
return -ENOMEM;

irq = platform_get_irq(pdev, 0);
- if (irq)
+ if (irq > 0)
irq_set_irq_type(irq, IRQ_TYPE_EDGE_RISING);
+ else if (irq < 0)
+ return irq;
+ else
+ return -EINVAL;

/* Setup expansion bus chip selects */
*data->cs0_cfg = data->cs0_bits;
--
2.30.2


\
 
 \ /
  Last update: 2021-05-12 18:31    [W:1.462 / U:0.516 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site