lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 191/390] usb: ch9: Add USB 3.2 SSP attributes
Date
From: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

[ Upstream commit f2fc9ff28d1c9bef7760516feadd38164044caae ]

In preparation for USB 3.2 dual-lane support, add sublink speed
attribute macros and enum usb_ssp_rate. A USB device that operates in
SuperSpeed Plus may operate at different speed and lane count. These
additional macros and enum values help specifying that.

Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ae9293ebd63a29f2a2035054753534d9eb123d74.1610592135.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: b6155eaf6b05 ("usb: common: debug: Check non-standard control requests")
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
include/linux/usb/ch9.h | 9 +++++++++
include/uapi/linux/usb/ch9.h | 13 +++++++++++++
2 files changed, 22 insertions(+)

diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 604c6c514a50..86c50907634e 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -36,6 +36,15 @@
#include <linux/device.h>
#include <uapi/linux/usb/ch9.h>

+/* USB 3.2 SuperSpeed Plus phy signaling rate generation and lane count */
+
+enum usb_ssp_rate {
+ USB_SSP_GEN_UNKNOWN = 0,
+ USB_SSP_GEN_2x1,
+ USB_SSP_GEN_1x2,
+ USB_SSP_GEN_2x2,
+};
+
/**
* usb_ep_type_string() - Returns human readable-name of the endpoint type.
* @ep_type: The endpoint type to return human-readable name for. If it's not
diff --git a/include/uapi/linux/usb/ch9.h b/include/uapi/linux/usb/ch9.h
index 0f865ae4ba89..17ce56198c9a 100644
--- a/include/uapi/linux/usb/ch9.h
+++ b/include/uapi/linux/usb/ch9.h
@@ -968,9 +968,22 @@ struct usb_ssp_cap_descriptor {
__le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */
#define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */
#define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */
+#define USB_SSP_SUBLINK_SPEED_LSE_BPS 0
+#define USB_SSP_SUBLINK_SPEED_LSE_KBPS 1
+#define USB_SSP_SUBLINK_SPEED_LSE_MBPS 2
+#define USB_SSP_SUBLINK_SPEED_LSE_GBPS 3
+
#define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */
+#define USB_SSP_SUBLINK_SPEED_ST_SYM_RX 0
+#define USB_SSP_SUBLINK_SPEED_ST_ASYM_RX 1
+#define USB_SSP_SUBLINK_SPEED_ST_SYM_TX 2
+#define USB_SSP_SUBLINK_SPEED_ST_ASYM_TX 3
+
#define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */
#define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */
+#define USB_SSP_SUBLINK_SPEED_LP_SS 0
+#define USB_SSP_SUBLINK_SPEED_LP_SSP 1
+
#define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */
} __attribute__((packed));

--
2.35.1


\
 
 \ /
  Last update: 2022-10-24 20:49    [W:1.574 / U:0.508 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site