lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 5.10 238/390] tty: serial: fsl_lpuart: disable dma rx/tx use flags in lpuart_dma_shutdown
    Date
    From: Sherry Sun <sherry.sun@nxp.com>

    [ Upstream commit 316ae95c175a7d770d1bfe4c011192712f57aa4a ]

    lpuart_dma_shutdown tears down lpuart dma, but lpuart_flush_buffer can
    still occur which in turn tries to access dma apis if lpuart_dma_tx_use
    flag is true. At this point since dma is torn down, these dma apis can
    abort. Set lpuart_dma_tx_use and the corresponding rx flag
    lpuart_dma_rx_use to false in lpuart_dma_shutdown so that dmas are not
    accessed after they are relinquished.

    Otherwise, when try to kill btattach, kernel may panic. This patch may
    fix this issue.
    root@imx8ulpevk:~# btattach -B /dev/ttyLP2 -S 115200
    ^C[ 90.182296] Internal error: synchronous external abort: 96000210 [#1] PREEMPT SMP
    [ 90.189806] Modules linked in: moal(O) mlan(O)
    [ 90.194258] CPU: 0 PID: 503 Comm: btattach Tainted: G O 5.15.32-06136-g34eecdf2f9e4 #37
    [ 90.203554] Hardware name: NXP i.MX8ULP 9X9 EVK (DT)
    [ 90.208513] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
    [ 90.215470] pc : fsl_edma3_disable_request+0x8/0x60
    [ 90.220358] lr : fsl_edma3_terminate_all+0x34/0x20c
    [ 90.225237] sp : ffff800013f0bac0
    [ 90.228548] x29: ffff800013f0bac0 x28: 0000000000000001 x27: ffff000008404800
    [ 90.235681] x26: ffff000008404960 x25: ffff000008404a08 x24: ffff000008404a00
    [ 90.242813] x23: ffff000008404a60 x22: 0000000000000002 x21: 0000000000000000
    [ 90.249946] x20: ffff800013f0baf8 x19: ffff00000559c800 x18: 0000000000000000
    [ 90.257078] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
    [ 90.264211] x14: 0000000000000003 x13: 0000000000000000 x12: 0000000000000040
    [ 90.271344] x11: ffff00000600c248 x10: ffff800013f0bb10 x9 : ffff000057bcb090
    [ 90.278477] x8 : fffffc0000241a08 x7 : ffff00000534ee00 x6 : ffff000008404804
    [ 90.285609] x5 : 0000000000000000 x4 : 0000000000000000 x3 : ffff0000055b3480
    [ 90.292742] x2 : ffff8000135c0000 x1 : ffff00000534ee00 x0 : ffff00000559c800
    [ 90.299876] Call trace:
    [ 90.302321] fsl_edma3_disable_request+0x8/0x60
    [ 90.306851] lpuart_flush_buffer+0x40/0x160
    [ 90.311037] uart_flush_buffer+0x88/0x120
    [ 90.315050] tty_driver_flush_buffer+0x20/0x30
    [ 90.319496] hci_uart_flush+0x44/0x90
    [ 90.323162] +0x34/0x12c
    [ 90.327253] tty_ldisc_close+0x38/0x70
    [ 90.331005] tty_ldisc_release+0xa8/0x190
    [ 90.335018] tty_release_struct+0x24/0x8c
    [ 90.339022] tty_release+0x3ec/0x4c0
    [ 90.342593] __fput+0x70/0x234
    [ 90.345652] ____fput+0x14/0x20
    [ 90.348790] task_work_run+0x84/0x17c
    [ 90.352455] do_exit+0x310/0x96c
    [ 90.355688] do_group_exit+0x3c/0xa0
    [ 90.359259] __arm64_sys_exit_group+0x1c/0x20
    [ 90.363609] invoke_syscall+0x48/0x114
    [ 90.367362] el0_svc_common.constprop.0+0xd4/0xfc
    [ 90.372068] do_el0_svc+0x2c/0x94
    [ 90.375379] el0_svc+0x28/0x80
    [ 90.378438] el0t_64_sync_handler+0xa8/0x130
    [ 90.382711] el0t_64_sync+0x1a0/0x1a4
    [ 90.386376] Code: 17ffffda d503201f d503233f f9409802 (b9400041)
    [ 90.392467] ---[ end trace 2f60524b4a43f1f6 ]---
    [ 90.397073] note: btattach[503] exited with preempt_count 1
    [ 90.402636] Fixing recursive fault but reboot is needed!

    Fixes: 6250cc30c4c4 ("tty: serial: fsl_lpuart: Use scatter/gather DMA for Tx")
    Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
    Signed-off-by: Thara Gopinath <tgopinath@microsoft.com>
    Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
    Link: https://lore.kernel.org/r/20220920111703.1532-1-sherry.sun@nxp.com
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/tty/serial/fsl_lpuart.c | 2 ++
    1 file changed, 2 insertions(+)

    diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
    index a2c4eab0b470..269d1e3a025d 100644
    --- a/drivers/tty/serial/fsl_lpuart.c
    +++ b/drivers/tty/serial/fsl_lpuart.c
    @@ -1725,6 +1725,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport)
    if (sport->lpuart_dma_rx_use) {
    del_timer_sync(&sport->lpuart_timer);
    lpuart_dma_rx_free(&sport->port);
    + sport->lpuart_dma_rx_use = false;
    }

    if (sport->lpuart_dma_tx_use) {
    @@ -1733,6 +1734,7 @@ static void lpuart_dma_shutdown(struct lpuart_port *sport)
    sport->dma_tx_in_progress = false;
    dmaengine_terminate_all(sport->dma_tx_chan);
    }
    + sport->lpuart_dma_tx_use = false;
    }

    if (sport->dma_tx_chan)
    --
    2.35.1


    \
     
     \ /
      Last update: 2022-10-24 15:35    [W:4.476 / U:0.124 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site