lkml.org 
[lkml]   [2022]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 079/390] thunderbolt: Explicitly enable lane adapter hotplug events at startup
Date
From: Mario Limonciello <mario.limonciello@amd.com>

commit 5d2569cb4a65c373896ec0217febdf88739ed295 upstream.

Software that has run before the USB4 CM in Linux runs may have disabled
hotplug events for a given lane adapter.

Other CMs such as that one distributed with Windows 11 will enable hotplug
events. Do the same thing in the Linux CM which fixes hotplug events on
"AMD Pink Sardine".

Cc: stable@vger.kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/thunderbolt/switch.c | 24 ++++++++++++++++++++++++
drivers/thunderbolt/tb.h | 1 +
drivers/thunderbolt/tb_regs.h | 1 +
drivers/thunderbolt/usb4.c | 20 ++++++++++++++++++++
4 files changed, 46 insertions(+)

--- a/drivers/thunderbolt/switch.c
+++ b/drivers/thunderbolt/switch.c
@@ -2413,6 +2413,26 @@ void tb_switch_unconfigure_link(struct t
tb_lc_unconfigure_port(down);
}

+static int tb_switch_port_hotplug_enable(struct tb_switch *sw)
+{
+ struct tb_port *port;
+
+ if (tb_switch_is_icm(sw))
+ return 0;
+
+ tb_switch_for_each_port(sw, port) {
+ int res;
+
+ if (!port->cap_usb4)
+ continue;
+
+ res = usb4_port_hotplug_enable(port);
+ if (res)
+ return res;
+ }
+ return 0;
+}
+
/**
* tb_switch_add() - Add a switch to the domain
* @sw: Switch to add
@@ -2480,6 +2500,10 @@ int tb_switch_add(struct tb_switch *sw)
return ret;
}

+ ret = tb_switch_port_hotplug_enable(sw);
+ if (ret)
+ return ret;
+
ret = device_add(&sw->dev);
if (ret) {
dev_err(&sw->dev, "failed to add device: %d\n", ret);
--- a/drivers/thunderbolt/tb.h
+++ b/drivers/thunderbolt/tb.h
@@ -979,6 +979,7 @@ struct tb_port *usb4_switch_map_usb3_dow
const struct tb_port *port);

int usb4_port_unlock(struct tb_port *port);
+int usb4_port_hotplug_enable(struct tb_port *port);
int usb4_port_configure(struct tb_port *port);
void usb4_port_unconfigure(struct tb_port *port);
int usb4_port_configure_xdomain(struct tb_port *port);
--- a/drivers/thunderbolt/tb_regs.h
+++ b/drivers/thunderbolt/tb_regs.h
@@ -285,6 +285,7 @@ struct tb_regs_port_header {
#define ADP_CS_5 0x05
#define ADP_CS_5_LCA_MASK GENMASK(28, 22)
#define ADP_CS_5_LCA_SHIFT 22
+#define ADP_CS_5_DHP BIT(31)

/* TMU adapter registers */
#define TMU_ADP_CS_3 0x03
--- a/drivers/thunderbolt/usb4.c
+++ b/drivers/thunderbolt/usb4.c
@@ -854,6 +854,26 @@ int usb4_port_unlock(struct tb_port *por
return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_4, 1);
}

+/**
+ * usb4_port_hotplug_enable() - Enables hotplug for a port
+ * @port: USB4 port to operate on
+ *
+ * Enables hot plug events on a given port. This is only intended
+ * to be used on lane, DP-IN, and DP-OUT adapters.
+ */
+int usb4_port_hotplug_enable(struct tb_port *port)
+{
+ int ret;
+ u32 val;
+
+ ret = tb_port_read(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
+ if (ret)
+ return ret;
+
+ val &= ~ADP_CS_5_DHP;
+ return tb_port_write(port, &val, TB_CFG_PORT, ADP_CS_5, 1);
+}
+
static int usb4_port_set_configured(struct tb_port *port, bool configured)
{
int ret;

\
 
 \ /
  Last update: 2022-10-24 15:08    [W:1.373 / U:0.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site