lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 009/563] mtd: rawnand: gpmi: Remove explicit default gpmi clock setting for i.MX6
Date
From: Stefan Riedmueller <s.riedmueller@phytec.de>

commit aa1baa0e6c1aa4872e481dce4fc7fd6f3dd8496b upstream.

There is no need to explicitly set the default gpmi clock rate during
boot for the i.MX 6 since this is done during nand_detect anyway.

Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Cc: stable@vger.kernel.org
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20211102202022.15551-1-ceggers@arri.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c | 9 ---------
1 file changed, 9 deletions(-)

--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -1052,15 +1052,6 @@ static int gpmi_get_clks(struct gpmi_nan
r->clock[i] = clk;
}

- if (GPMI_IS_MX6(this))
- /*
- * Set the default value for the gpmi clock.
- *
- * If you want to use the ONFI nand which is in the
- * Synchronous Mode, you should change the clock as you need.
- */
- clk_set_rate(r->clock[0], 22000000);
-
return 0;

err_clock:

\
 
 \ /
  Last update: 2022-01-25 04:09    [W:1.759 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site