lkml.org 
[lkml]   [2022]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 445/563] tpm: fix NPE on probe for missing device
Date
From: Patrick Williams <patrick@stwcx.xyz>

commit 84cc69589700b90a4c8d27b481a51fce8cca6051 upstream.

When using the tpm_tis-spi driver on a system missing the physical TPM,
a null pointer exception was observed.

[ 0.938677] Unable to handle kernel NULL pointer dereference at virtual address 00000004
[ 0.939020] pgd = 10c753cb
[ 0.939237] [00000004] *pgd=00000000
[ 0.939808] Internal error: Oops: 5 [#1] SMP ARM
[ 0.940157] CPU: 0 PID: 48 Comm: kworker/u4:1 Not tainted 5.15.10-dd1e40c #1
[ 0.940364] Hardware name: Generic DT based system
[ 0.940601] Workqueue: events_unbound async_run_entry_fn
[ 0.941048] PC is at tpm_tis_remove+0x28/0xb4
[ 0.941196] LR is at tpm_tis_core_init+0x170/0x6ac

This is due to an attempt in 'tpm_tis_remove' to use the drvdata, which
was not initialized in 'tpm_tis_core_init' prior to the first error.

Move the initialization of drvdata earlier so 'tpm_tis_remove' has
access to it.

Signed-off-by: Patrick Williams <patrick@stwcx.xyz>
Fixes: 79ca6f74dae0 ("tpm: fix Atmel TPM crash caused by too frequent queries")
Cc: stable@vger.kernel.org
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/char/tpm/tpm_tis_core.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/char/tpm/tpm_tis_core.c
+++ b/drivers/char/tpm/tpm_tis_core.c
@@ -950,6 +950,8 @@ int tpm_tis_core_init(struct device *dev
priv->timeout_max = TPM_TIMEOUT_USECS_MAX;
priv->phy_ops = phy_ops;

+ dev_set_drvdata(&chip->dev, priv);
+
rc = tpm_tis_read32(priv, TPM_DID_VID(0), &vendor);
if (rc < 0)
return rc;
@@ -962,8 +964,6 @@ int tpm_tis_core_init(struct device *dev
priv->timeout_max = TIS_TIMEOUT_MAX_ATML;
}

- dev_set_drvdata(&chip->dev, priv);
-
if (is_bsw()) {
priv->ilb_base_addr = ioremap(INTEL_LEGACY_BLK_BASE_ADDR,
ILB_REMAP_SIZE);

\
 
 \ /
  Last update: 2022-01-24 21:23    [W:1.099 / U:0.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site