| From | Greg Kroah-Hartman <> | Subject | [PATCH 5.10 108/563] media: rcar-csi2: Correct the selection of hsfreqrange | Date | Mon, 24 Jan 2022 19:37:53 +0100 |
| |
From: Suresh Udipi <sudipi@jp.adit-jv.com>
[ Upstream commit cee44d4fbacbbdfe62697ec94e76c6e4f726c5df ]
hsfreqrange should be chosen based on the calculated mbps which is closer to the default bit rate and within the range as per table[1]. But current calculation always selects first value which is greater than or equal to the calculated mbps which may lead to chosing a wrong range in some cases.
For example for 360 mbps for H3/M3N Existing logic selects Calculated value 360Mbps : Default 400Mbps Range [368.125 -433.125 mbps]
This hsfreqrange is out of range.
The logic is changed to get the default value which is closest to the calculated value [1]
Calculated value 360Mbps : Default 350Mbps Range [320.625 -380.625 mpbs]
[1] specs r19uh0105ej0200-r-car-3rd-generation.pdf [Table 25.9]
Please note that According to Renesas in Table 25.9 the range for 220 default value is corrected as below
|Range (Mbps) | Default Bit rate (Mbps) | ----------------------------------------------- | 197.125-244.125 | 220 | -----------------------------------------------
Fixes: 769afd212b16 ("media: rcar-csi2: add Renesas R-Car MIPI CSI-2 receiver driver") Signed-off-by: Suresh Udipi <sudipi@jp.adit-jv.com> Signed-off-by: Kazuyoshi Akiyama <akiyama@nds-osk.co.jp> Signed-off-by: Michael Rodin <mrodin@de.adit-jv.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/media/platform/rcar-vin/rcar-csi2.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/rcar-vin/rcar-csi2.c b/drivers/media/platform/rcar-vin/rcar-csi2.c index d2d87a204e918..6fb8efcb40444 100644 --- a/drivers/media/platform/rcar-vin/rcar-csi2.c +++ b/drivers/media/platform/rcar-vin/rcar-csi2.c @@ -436,16 +436,23 @@ static int rcsi2_wait_phy_start(struct rcar_csi2 *priv, static int rcsi2_set_phypll(struct rcar_csi2 *priv, unsigned int mbps) { const struct rcsi2_mbps_reg *hsfreq; + const struct rcsi2_mbps_reg *hsfreq_prev = NULL; - for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) + for (hsfreq = priv->info->hsfreqrange; hsfreq->mbps != 0; hsfreq++) { if (hsfreq->mbps >= mbps) break; + hsfreq_prev = hsfreq; + } if (!hsfreq->mbps) { dev_err(priv->dev, "Unsupported PHY speed (%u Mbps)", mbps); return -ERANGE; } + if (hsfreq_prev && + ((mbps - hsfreq_prev->mbps) <= (hsfreq->mbps - mbps))) + hsfreq = hsfreq_prev; + rcsi2_write(priv, PHYPLL_REG, PHYPLL_HSFREQRANGE(hsfreq->reg)); return 0; -- 2.34.1
|