lkml.org 
[lkml]   [2022]   [Aug]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 07/19] hwmon: (mr75203) enable polling for all VM channels
Date
Configure ip-polling register to enable polling for all voltage monitor
channels.
This enables reading the voltage values for all inputs other than just
input 0.

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V3 -> V2:
- Move configuration of ip-polling register from previous patch to a
separate commit.

drivers/hwmon/mr75203.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)

diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 639f5a300170..f561806c400d 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -388,6 +388,20 @@ static int pvt_init(struct pvt_device *pvt)
if (ret)
return ret;

+ val = GENMASK(pvt->c_num - 1, 0) | VM_CH_INIT |
+ IP_POLL << SDIF_ADDR_SFT |
+ SDIF_WRN_W | SDIF_PROG;
+ ret = regmap_write(v_map, SDIF_W, val);
+ if (ret < 0)
+ return ret;
+
+ ret = regmap_read_poll_timeout(v_map, SDIF_STAT,
+ val, !(val & SDIF_BUSY),
+ PVT_POLL_DELAY_US,
+ PVT_POLL_TIMEOUT_US);
+ if (ret)
+ return ret;
+
val = CFG1_VOL_MEAS_MODE | CFG1_PARALLEL_OUT |
CFG1_14_BIT | IP_CFG << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
--
2.37.1
\
 
 \ /
  Last update: 2022-08-30 21:23    [W:0.404 / U:1.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site