lkml.org 
[lkml]   [2022]   [Sep]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 18/19] hwmon: (mr75203) add debugfs to read and write temperature coefficients
Date
From
On 8/31/2022 3:14 PM, Andy Shevchenko wrote:
> On Tue, Aug 30, 2022 at 07:22:11PM +0000, Eliav Farber wrote:
>> This change adds debugfs to read and write temperature sensor
>> coefficients
>> - g, h, j and cal5.
>>
>> The coefficients can vary between product and product, so it can be very
>> useful to be able to modify them on the fly during the calibration
>> process.
>>
>> e.g.:
>>
>> cat /sys/kernel/debug/940f23d0000.pvt/ts_coeff_cal5
>> 4096
>>
>> echo 83000 > sys/kernel/debug/940f23d0000.pvt/ts_coeff_g
>
> ...
>
>> +     pvt->dbgfs_dir = debugfs_create_dir(dev_name(dev), NULL);
>
>> +     if (!pvt->dbgfs_dir) {
>> +             dev_err(dev, "Failed to create dbgfs_dir\n");
>> +             return -EINVAL;
>> +     }
>
> No, just don't check the return value of debugfs API calls.
>
Do you mean that I should just do:
debugfs_create_dir(dev_name(dev), NULL);
Can you please explain why it's OK to ignore the return value?

>> +     debugfs_create_file("ts_coeff_h", 0644, pvt->dbgfs_dir, pvt,
>> +                         &pvt_ts_coeff_h_fops);
>> +     debugfs_create_file("ts_coeff_g", 0644, pvt->dbgfs_dir, pvt,
>> +                         &pvt_ts_coeff_g_fops);
>> +     debugfs_create_file("ts_coeff_j", 0644, pvt->dbgfs_dir, pvt,
>> +                         &pvt_ts_coeff_j_fops);
>> +     debugfs_create_file("ts_coeff_cal5", 0644, pvt->dbgfs_dir,  pvt,
>> +                         &pvt_ts_coeff_cal5_fops);
>
> debugfs has helpers for POD types, use them and shrink your code by ~80%.
>
Fixed for v4.
I used debugfs_create_u32() for ts_coeff_h, ts_coeff_g and ts_coeff_j.
For ts_coeff_cal5 I still use debugfs_create_file() because I must make
sure it is not set to 0.

>> +     ret = devm_add_action_or_reset(dev, devm_pvt_ts_dbgfs_remove,
>> pvt);
>> +     if (ret) {
>> +             dev_err(dev, "failed to add action to remove pvt dbgfs
>> (%d)\n",
>> +                     ret);
>> +             return ret;
>> +     }
>> +
>> +     return 0;
>
> return devm_add_...
Fixed for v4.

--
Thanks, Eliav

\
 
 \ /
  Last update: 2022-09-01 08:55    [W:0.343 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site