lkml.org 
[lkml]   [2022]   [Aug]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 04/19] dt-bindings: hwmon: (mr75203) change "reset" property to be optional
From
Date
On Mi, 2022-08-31 at 12:43 +0300, Farber, Eliav wrote:
> On 8/31/2022 11:21 AM, Philipp Zabel wrote:
> > On Di, 2022-08-30 at 19:21 +0000, Eliav Farber wrote:
> > > Change "reset" property to be optional instead of required, for SOCs
> > > that
> > > don't support a reset controller.
> > >
> > > Signed-off-by: Eliav Farber <farbere@amazon.com>
> > > ---
> > > V3 -> v2:
> > > - Change "reset" property to be optional instead of adding new
> > >   "reset-control-skip" property.
> > >
> > >  Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml | 1 -
> > >  1 file changed, 1 deletion(-)
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > index 6abde48b746e..2ec4b9da4b92 100644
> > > --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> > > @@ -49,7 +49,6 @@ required:
> > >    - reg
> > >    - reg-names
> > >    - clocks
> > > -  - resets
> >
> > Is this just for mr76006? Or does mr75203 work without reset as well?
> >
> > If it is the former, maybe a new compatible should be added and resets
> > should be kept required
>
> mr75203 also works without a reset.
> As I replied in PATCH v3 14/19, series 5/6 is relevant only for the
> temperature sensor.
> The “reset” property is relevant to the controller.

In that case,

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

\
 
 \ /
  Last update: 2022-08-31 11:49    [W:0.305 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site