lkml.org 
[lkml]   [2022]   [Jul]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH net-next v3 07/47] net: phy: Add support for rate adaptation
>  drivers/net/phy/phy.c | 21 +++++++++++++++++++++
> include/linux/phy.h | 38 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 59 insertions(+)
>
> diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
> index 8d3ee3a6495b..cf4a8b055a42 100644
> --- a/drivers/net/phy/phy.c
> +++ b/drivers/net/phy/phy.c
> @@ -114,6 +114,27 @@ void phy_print_status(struct phy_device *phydev)
> }
> EXPORT_SYMBOL(phy_print_status);
>
> +/**
> + * phy_get_rate_adaptation - determine if rate adaptation is supported
> + * @phydev: The phy device to return rate adaptation for
> + * @iface: The interface mode to use
> + *
> + * This determines the type of rate adaptation (if any) that @phy supports
> + * using @iface. @iface may be %PHY_INTERFACE_MODE_NA to determine if any
> + * interface supports rate adaptation.
> + *
> + * Return: The type of rate adaptation @phy supports for @iface, or
> + * %RATE_ADAPT_NONE.
> + */
> +enum rate_adaptation phy_get_rate_adaptation(struct phy_device *phydev,
> + phy_interface_t iface)
> +{
> + if (phydev->drv->get_rate_adaptation)
> + return phydev->drv->get_rate_adaptation(phydev, iface);

It is normal that any call into the driver is performed with the
phydev->lock held.

> #define PHY_INIT_TIMEOUT 100000
> #define PHY_FORCE_TIMEOUT 10
> @@ -570,6 +588,7 @@ struct macsec_ops;
> * @lp_advertising: Current link partner advertised linkmodes
> * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited
> * @autoneg: Flag autoneg being used
> + * @rate_adaptation: Current rate adaptation mode
> * @link: Current link state
> * @autoneg_complete: Flag auto negotiation of the link has completed
> * @mdix: Current crossover
> @@ -637,6 +656,8 @@ struct phy_device {
> unsigned irq_suspended:1;
> unsigned irq_rerun:1;
>
> + enum rate_adaptation rate_adaptation;

It is not clear what the locking is on this member. Is it only safe to
access it during the adjust_link callback, when it is guaranteed that
the phydev->lock is held, so the value is consistent? Or is the MAC
allowed to access this at other times?

Andrew

\
 
 \ /
  Last update: 2022-07-16 21:40    [W:0.555 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site