lkml.org 
[lkml]   [2018]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 182/496] IB/mlx: Set slid to zero in Ethernet completion struct
Date
4.14-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Moni Shoua <monis@mellanox.com>

[ Upstream commit 65389322b28f81cc137b60a41044c2d958a7b950 ]

IB spec says that a lid should be ignored when link layer is Ethernet,
for example when building or parsing a CM request message (CA17-34).
However, since ib_lid_be16() and ib_lid_cpu16() validates the slid,
not only when link layer is IB, we set the slid to zero to prevent
false warnings in the kernel log.

Fixes: 62ede7779904 ("Add OPA extended LID support")
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/infiniband/hw/mlx4/cq.c | 4 +++-
drivers/infiniband/hw/mlx5/cq.c | 3 ++-
2 files changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/infiniband/hw/mlx4/cq.c
+++ b/drivers/infiniband/hw/mlx4/cq.c
@@ -597,6 +597,7 @@ static void use_tunnel_data(struct mlx4_
wc->dlid_path_bits = 0;

if (is_eth) {
+ wc->slid = 0;
wc->vlan_id = be16_to_cpu(hdr->tun.sl_vid);
memcpy(&(wc->smac[0]), (char *)&hdr->tun.mac_31_0, 4);
memcpy(&(wc->smac[4]), (char *)&hdr->tun.slid_mac_47_32, 2);
@@ -845,7 +846,6 @@ repoll:
}
}

- wc->slid = be16_to_cpu(cqe->rlid);
g_mlpath_rqpn = be32_to_cpu(cqe->g_mlpath_rqpn);
wc->src_qp = g_mlpath_rqpn & 0xffffff;
wc->dlid_path_bits = (g_mlpath_rqpn >> 24) & 0x7f;
@@ -854,6 +854,7 @@ repoll:
wc->wc_flags |= mlx4_ib_ipoib_csum_ok(cqe->status,
cqe->checksum) ? IB_WC_IP_CSUM_OK : 0;
if (is_eth) {
+ wc->slid = 0;
wc->sl = be16_to_cpu(cqe->sl_vid) >> 13;
if (be32_to_cpu(cqe->vlan_my_qpn) &
MLX4_CQE_CVLAN_PRESENT_MASK) {
@@ -865,6 +866,7 @@ repoll:
memcpy(wc->smac, cqe->smac, ETH_ALEN);
wc->wc_flags |= (IB_WC_WITH_VLAN | IB_WC_WITH_SMAC);
} else {
+ wc->slid = be16_to_cpu(cqe->rlid);
wc->sl = be16_to_cpu(cqe->sl_vid) >> 12;
wc->vlan_id = 0xffff;
}
--- a/drivers/infiniband/hw/mlx5/cq.c
+++ b/drivers/infiniband/hw/mlx5/cq.c
@@ -224,7 +224,6 @@ static void handle_responder(struct ib_w
wc->ex.invalidate_rkey = be32_to_cpu(cqe->imm_inval_pkey);
break;
}
- wc->slid = be16_to_cpu(cqe->slid);
wc->src_qp = be32_to_cpu(cqe->flags_rqpn) & 0xffffff;
wc->dlid_path_bits = cqe->ml_path;
g = (be32_to_cpu(cqe->flags_rqpn) >> 28) & 3;
@@ -239,10 +238,12 @@ static void handle_responder(struct ib_w
}

if (ll != IB_LINK_LAYER_ETHERNET) {
+ wc->slid = be16_to_cpu(cqe->slid);
wc->sl = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0xf;
return;
}

+ wc->slid = 0;
vlan_present = cqe->l4_l3_hdr_type & 0x1;
roce_packet_type = (be32_to_cpu(cqe->flags_rqpn) >> 24) & 0x3;
if (vlan_present) {

\
 
 \ /
  Last update: 2018-05-28 12:51    [W:1.082 / U:0.228 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site