lkml.org 
[lkml]   [2018]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.14 179/496] ARC: mcip: update MCIP debug mask when the new cpu came online
    Date
    4.14-stable review patch.  If anyone has any objections, please let me know.

    ------------------

    From: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>

    [ Upstream commit f3205de98db2fc8083796dd5ad81b191e436fab8 ]

    As of today we use hardcoded MCIP debug mask, so if we launch
    kernel via debugger and kick fever cores than HW has all cpus
    hang at the momemt of setup MCIP debug mask.

    So update MCIP debug mask when the new cpu came online, instead of
    use hardcoded MCIP debug mask.

    Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
    Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
    Signed-off-by: Sasha Levin <alexander.levin@microsoft.com>
    Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    ---
    arch/arc/kernel/mcip.c | 37 ++++++++++++++++++++++++++++++++-----
    include/soc/arc/mcip.h | 2 ++
    2 files changed, 34 insertions(+), 5 deletions(-)

    --- a/arch/arc/kernel/mcip.c
    +++ b/arch/arc/kernel/mcip.c
    @@ -51,6 +51,34 @@ static void mcip_update_gfrc_halt_mask(i
    raw_spin_unlock_irqrestore(&mcip_lock, flags);
    }

    +static void mcip_update_debug_halt_mask(int cpu)
    +{
    + u32 mcip_mask = 0;
    + unsigned long flags;
    +
    + raw_spin_lock_irqsave(&mcip_lock, flags);
    +
    + /*
    + * mcip_mask is same for CMD_DEBUG_SET_SELECT and CMD_DEBUG_SET_MASK
    + * commands. So read it once instead of reading both CMD_DEBUG_READ_MASK
    + * and CMD_DEBUG_READ_SELECT.
    + */
    + __mcip_cmd(CMD_DEBUG_READ_SELECT, 0);
    + mcip_mask = read_aux_reg(ARC_REG_MCIP_READBACK);
    +
    + mcip_mask |= BIT(cpu);
    +
    + __mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, mcip_mask);
    + /*
    + * Parameter specified halt cause:
    + * STATUS32[H]/actionpoint/breakpoint/self-halt
    + * We choose all of them (0xF).
    + */
    + __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xF, mcip_mask);
    +
    + raw_spin_unlock_irqrestore(&mcip_lock, flags);
    +}
    +
    static void mcip_setup_per_cpu(int cpu)
    {
    struct mcip_bcr mp;
    @@ -63,6 +91,10 @@ static void mcip_setup_per_cpu(int cpu)
    /* Update GFRC halt mask as new CPU came online */
    if (mp.gfrc)
    mcip_update_gfrc_halt_mask(cpu);
    +
    + /* Update MCIP debug mask as new CPU came online */
    + if (mp.dbg)
    + mcip_update_debug_halt_mask(cpu);
    }

    static void mcip_ipi_send(int cpu)
    @@ -138,11 +170,6 @@ static void mcip_probe_n_setup(void)
    IS_AVAIL1(mp.gfrc, "GFRC"));

    cpuinfo_arc700[0].extn.gfrc = mp.gfrc;
    -
    - if (mp.dbg) {
    - __mcip_cmd_data(CMD_DEBUG_SET_SELECT, 0, 0xf);
    - __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf);
    - }
    }

    struct plat_smp_ops plat_smp_ops = {
    --- a/include/soc/arc/mcip.h
    +++ b/include/soc/arc/mcip.h
    @@ -37,7 +37,9 @@ struct mcip_cmd {
    #define CMD_SEMA_RELEASE 0x12

    #define CMD_DEBUG_SET_MASK 0x34
    +#define CMD_DEBUG_READ_MASK 0x35
    #define CMD_DEBUG_SET_SELECT 0x36
    +#define CMD_DEBUG_READ_SELECT 0x37

    #define CMD_GFRC_READ_LO 0x42
    #define CMD_GFRC_READ_HI 0x43

    \
     
     \ /
      Last update: 2018-05-28 15:14    [W:4.029 / U:0.036 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site