lkml.org 
[lkml]   [2020]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 12/19] spi: dw: Fix Rx-only DMA transfers
On Fri, May 15, 2020 at 01:47:51PM +0300, Serge Semin wrote:
> Tx-only DMA transfers are working perfectly fine since in this case
> the code just ignores the Rx FIFO overflow interrupts. But it turns
> out the SPI Rx-only transfers are broken since nothing pushing any
> data to the shift registers, so the Rx FIFO is left empty and the
> SPI core subsystems just returns a timeout error. Since DW DMAC
> driver doesn't support something like cyclic write operations of
> a single byte to a device register, the only way to support the
> Rx-only SPI transfers is to fake it by using a dummy Tx-buffer.
> This is what we intend to fix in this commit by setting the
> SPI_CONTROLLER_MUST_TX flag for DMA-capable platform.

I'm fine with this if Mark considers this right thing to do.
So, conditionally
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

>
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Allison Randal <allison@lohutok.net>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Gareth Williams <gareth.williams.jx@renesas.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-mips@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> ---
> drivers/spi/spi-dw.c | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
> index 1edb8cdd11ee..31607b40147d 100644
> --- a/drivers/spi/spi-dw.c
> +++ b/drivers/spi/spi-dw.c
> @@ -517,6 +517,7 @@ int dw_spi_add_host(struct device *dev, struct dw_spi *dws)
> dev_warn(dev, "DMA init failed\n");
> } else {
> master->can_dma = dws->dma_ops->can_dma;
> + master->flags |= SPI_CONTROLLER_MUST_TX;
> }
> }
>
> --
> 2.25.1
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-05-15 16:41    [W:0.940 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site