lkml.org 
[lkml]   [2020]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 04/19] spi: dw: Fix native CS being unset
On Fri, May 15, 2020 at 01:47:43PM +0300, Serge Semin wrote:
> Commit 6e0a32d6f376 ("spi: dw: Fix default polarity of native
> chipselect") attempted to fix the problem when GPIO active-high
> chip-select is utilized to communicate with some SPI slave. It fixed
> the problem, but broke the normal native CS support. At the same time
> the reversion commit ada9e3fcc175 ("spi: dw: Correct handling of native
> chipselect") didn't solve the problem either, since it just inverted
> the set_cs() polarity perception without taking into account that
> CS-high might be applicable. Here is what is done to finally fix the
> problem.
>
> DW SPI controller demands any native CS being set in order to proceed
> with data transfer. So in order to activate the SPI communications we
> must set any bit in the Slave Select DW SPI controller register no
> matter whether the platform requests the GPIO- or native CS. Preferably
> it should be the bit corresponding to the SPI slave CS number. But
> currently the dw_spi_set_cs() method activates the chip-select
> only if the second argument is false. Since the second argument of the
> set_cs callback is expected to be a boolean with "is-high" semantics
> (actual chip-select pin state value), the bit in the DW SPI Slave
> Select register will be set only if SPI core requests the driver
> to set the CS in the low state. So this will work for active-low
> GPIO-based CS case, and won't work for active-high CS setting
> the bit when SPI core actually needs to deactivate the CS.
>
> This commit fixes the problem for all described cases. So no matter
> whether an SPI slave needs GPIO- or native-based CS with active-high
> or low signal the corresponding bit will be set in SER.

Nice catch!
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Fixes: ada9e3fcc175 ("spi: dw: Correct handling of native chipselect")
> Fixes: 6e0a32d6f376 ("spi: dw: Fix default polarity of native chipselect")
> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
> Acked-by: Linus Walleij <linus.walleij@linaro.org>
> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Allison Randal <allison@lohutok.net>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Gareth Williams <gareth.williams.jx@renesas.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: linux-mips@vger.kernel.org
> Cc: devicetree@vger.kernel.org
>
> ---
>
> Changelog v2:
> - Add a comment about SER register, that it must be set to activate the
> SPI communications.
> ---
> drivers/spi/spi-dw.c | 10 +++++++++-
> 1 file changed, 9 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
> index 6de196df9c96..450c8218caeb 100644
> --- a/drivers/spi/spi-dw.c
> +++ b/drivers/spi/spi-dw.c
> @@ -124,8 +124,16 @@ static inline void dw_spi_debugfs_remove(struct dw_spi *dws)
> void dw_spi_set_cs(struct spi_device *spi, bool enable)
> {
> struct dw_spi *dws = spi_controller_get_devdata(spi->controller);
> + bool cs_high = !!(spi->mode & SPI_CS_HIGH);
>
> - if (!enable)
> + /*
> + * DW SPI controller demands any native CS being set in order to
> + * proceed with data transfer. So in order to activate the SPI
> + * communications we must set a corresponding bit in the Slave
> + * Enable register no matter whether the SPI core is configured to
> + * support active-high or active-low CS level.
> + */
> + if (cs_high == enable)
> dw_writel(dws, DW_SPI_SER, BIT(spi->chip_select));
> else if (dws->cs_override)
> dw_writel(dws, DW_SPI_SER, 0);
> --
> 2.25.1
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-05-15 14:05    [W:0.769 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site