lkml.org 
[lkml]   [2020]   [May]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 01/19] dt-bindings: spi: dw: Add Tx/Rx DMA properties
On Fri, May 15, 2020 at 01:47:40PM +0300, Serge Semin wrote:
> Since commit 22d48ad7bfac ("spi: dw: Add Elkhart Lake PSE DMA support")
> the spi-dw-mid.c module supports a platform DMA engine handling the DW APB
> SSI controller requests. Lets alter the DW SPI bindings file to accept the
> Rx and Tx DMA line specifiers.

I'm wondering if these properties are implied by the SPI generic one?
(forgive me if I'm not understanding all DT schema relations)

Per se looks good.

> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru>
> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru>
> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru>
> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> Cc: Paul Burton <paulburton@kernel.org>
> Cc: Ralf Baechle <ralf@linux-mips.org>
> Cc: Arnd Bergmann <arnd@arndb.de>
> Cc: Allison Randal <allison@lohutok.net>
> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
> Cc: Gareth Williams <gareth.williams.jx@renesas.com>
> Cc: linux-mips@vger.kernel.org
>
> ---
>
> Changelog v2:
> - Revert the order of the DT changes: first add the DMA channels support,
> then perform the binding file conversion.
> ---
> Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> index 7a4702edf896..020e3168ee41 100644
> --- a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt
> @@ -23,6 +23,8 @@ Optional properties:
> - num-cs : The number of chipselects. If omitted, this will default to 4.
> - reg-io-width : The I/O register width (in bytes) implemented by this
> device. Supported values are 2 or 4 (the default).
> +- dmas : Phandle + identifiers of Tx and Rx DMA channels.
> +- dma-names : Contains the names of the DMA channels. Must be "tx" and "rx".
>
> Child nodes as per the generic SPI binding.
>
> --
> 2.25.1
>

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2020-05-15 13:52    [W:0.256 / U:2.196 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site