lkml.org 
[lkml]   [2020]   [May]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 13/17] spi: dw: Initialize paddr in DW SPI MMIO private data
On Fri, May 08, 2020 at 10:21:44PM +0300, Andy Shevchenko wrote:
> On Fri, May 08, 2020 at 04:29:38PM +0300, Serge Semin wrote:
> > This field is used only for the DW SPI DMA code initialization, that's
> > why there were no problems with it being uninitialized in Dw SPI MMIO
> > driver. Since in a further patch we are going to introduce the DW SPI DMA
> > support in the MMIO version of the driver, lets set the field with the
> > physical address of the DW SPI controller registers region.
>
> ...
>
> > - dws->regs = devm_platform_ioremap_resource(pdev, 0);
> > + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + dws->regs = devm_ioremap_resource(&pdev->dev, mem);
>

> There is a helper
> dws->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &mem);

Oh, good point. It has been just added, in kernel v5.7. v5.6 didn't provide such
a convenient helper. Thanks for the suggestion.

-Sergey

>
>
> > if (IS_ERR(dws->regs)) {
> > dev_err(&pdev->dev, "SPI region map failed\n");
> > return PTR_ERR(dws->regs);
> > }
> > + dws->paddr = mem->start;
> >
> > dws->irq = platform_get_irq(pdev, 0);
> > if (dws->irq < 0)
> > --
> > 2.25.1
> >
>
> --
> With Best Regards,
> Andy Shevchenko
>
>

\
 
 \ /
  Last update: 2020-05-13 14:31    [W:0.069 / U:0.044 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site