lkml.org 
[lkml]   [2013]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 01/32] dmaengine: ste_dma40: Assign memcpy channels in the driver
On Thu, Apr 18, 2013 at 11:11:43AM +0100, Lee Jones wrote:
> The channels reserved for memcpy are the same for all currently
> supported platforms. With this in mind, we can ease the platform
> data passing requirement by moving these assignments out from
> platform code and place them directly into the driver.
>
> Cc: Vinod Koul <vinod.koul@intel.com>
> Cc: Dan Williams <djbw@fb.com>
> Cc: Per Forlin <per.forlin@stericsson.com>
> Cc: Rabin Vincent <rabin@rab.in>
> Acked-by: Arnd Bergmann <arnd@arndb.de>
> Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Vinod Koul <vnod.koul@intel.com>

--
~Vinod
> ---
> arch/arm/mach-ux500/devices-db8500.c | 12 ------------
> drivers/dma/ste_dma40.c | 12 +++++++-----
> include/linux/platform_data/dma-ste-dma40.h | 4 ----
> 3 files changed, 7 insertions(+), 21 deletions(-)
>
> diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
> index afa5b04..9b09683 100644
> --- a/arch/arm/mach-ux500/devices-db8500.c
> +++ b/arch/arm/mach-ux500/devices-db8500.c
> @@ -146,22 +146,10 @@ static const dma_addr_t dma40_rx_map[DB8500_DMA_NR_DEV] = {
> [DB8500_DMA_DEV48_CAC1_RX] = U8500_CRYP1_BASE + CRYP1_RX_REG_OFFSET,
> };
>
> -/* Reserved event lines for memcpy only */
> -static int dma40_memcpy_event[] = {
> - DB8500_DMA_MEMCPY_TX_0,
> - DB8500_DMA_MEMCPY_TX_1,
> - DB8500_DMA_MEMCPY_TX_2,
> - DB8500_DMA_MEMCPY_TX_3,
> - DB8500_DMA_MEMCPY_TX_4,
> - DB8500_DMA_MEMCPY_TX_5,
> -};
> -
> static struct stedma40_platform_data dma40_plat_data = {
> .dev_len = DB8500_DMA_NR_DEV,
> .dev_rx = dma40_rx_map,
> .dev_tx = dma40_tx_map,
> - .memcpy = dma40_memcpy_event,
> - .memcpy_len = ARRAY_SIZE(dma40_memcpy_event),
> .memcpy_conf_phy = &dma40_memcpy_conf_phy,
> .memcpy_conf_log = &dma40_memcpy_conf_log,
> .disabled_channels = {-1},
> diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c
> index 1734fee..12de79e 100644
> --- a/drivers/dma/ste_dma40.c
> +++ b/drivers/dma/ste_dma40.c
> @@ -55,6 +55,9 @@
>
> #define MAX(a, b) (((a) < (b)) ? (b) : (a))
>
> +/* Reserved event lines for memcpy only. */
> +static int dma40_memcpy_channels[] = { 56, 57, 58, 59, 60 };
> +
> /**
> * enum 40_command - The different commands and/or statuses.
> *
> @@ -2014,8 +2017,7 @@ static int d40_config_memcpy(struct d40_chan *d40c)
> if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
> d40c->dma_cfg = *d40c->base->plat_data->memcpy_conf_log;
> d40c->dma_cfg.src_dev_type = STEDMA40_DEV_SRC_MEMORY;
> - d40c->dma_cfg.dst_dev_type = d40c->base->plat_data->
> - memcpy[d40c->chan.chan_id];
> + d40c->dma_cfg.dst_dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
>
> } else if (dma_has_cap(DMA_MEMCPY, cap) &&
> dma_has_cap(DMA_SLAVE, cap)) {
> @@ -2927,7 +2929,7 @@ static int __init d40_dmaengine_init(struct d40_base *base,
> }
>
> d40_chan_init(base, &base->dma_memcpy, base->log_chans,
> - base->num_log_chans, base->plat_data->memcpy_len);
> + base->num_log_chans, ARRAY_SIZE(dma40_memcpy_channels));
>
> dma_cap_zero(base->dma_memcpy.cap_mask);
> dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
> @@ -3215,7 +3217,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
> num_log_chans++;
>
> base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
> - (num_phy_chans + num_log_chans + plat_data->memcpy_len) *
> + (num_phy_chans + num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) *
> sizeof(struct d40_chan), GFP_KERNEL);
>
> if (base == NULL) {
> @@ -3276,7 +3278,7 @@ static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
> if (!base->lookup_phy_chans)
> goto failure;
>
> - if (num_log_chans + plat_data->memcpy_len) {
> + if (num_log_chans + ARRAY_SIZE(dma40_memcpy_channels)) {
> /*
> * The max number of logical channels are event lines for all
> * src devices and dst devices
> diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h
> index 4b78101..a808784 100644
> --- a/include/linux/platform_data/dma-ste-dma40.h
> +++ b/include/linux/platform_data/dma-ste-dma40.h
> @@ -141,8 +141,6 @@ struct stedma40_chan_cfg {
> * @dev_len: length of dev_tx and dev_rx
> * @dev_tx: mapping between destination event line and io address
> * @dev_rx: mapping between source event line and io address
> - * @memcpy: list of memcpy event lines
> - * @memcpy_len: length of memcpy
> * @memcpy_conf_phy: default configuration of physical channel memcpy
> * @memcpy_conf_log: default configuration of logical channel memcpy
> * @disabled_channels: A vector, ending with -1, that marks physical channels
> @@ -162,8 +160,6 @@ struct stedma40_platform_data {
> u32 dev_len;
> const dma_addr_t *dev_tx;
> const dma_addr_t *dev_rx;
> - int *memcpy;
> - u32 memcpy_len;
> struct stedma40_chan_cfg *memcpy_conf_phy;
> struct stedma40_chan_cfg *memcpy_conf_log;
> int disabled_channels[STEDMA40_MAX_PHYS];
> --
> 1.7.10.4
>


\
 
 \ /
  Last update: 2013-04-22 12:41    [W:0.874 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site