lkml.org 
[lkml]   [2013]   [Apr]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs
Date
DMA configuration data is now allocated in the MMCI driver, so these
are just ignored.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/mach-ux500/board-mop500-sdi.c | 16 ----------------
1 file changed, 16 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 5c28216..553ace6 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -65,16 +65,12 @@ struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV29_SD_MM0,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};

static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV29_SD_MM0,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};
#endif

@@ -134,16 +130,12 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV32_SD_MM1,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};

static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV32_SD_MM1,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};
#endif

@@ -169,16 +161,12 @@ struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV28_SD_MM2,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};

static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV28_SD_MM2,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};
#endif

@@ -205,16 +193,12 @@ struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_PERIPH_TO_MEM,
.dev_type = DB8500_DMA_DEV42_SD_MM4,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};

static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
.mode = STEDMA40_MODE_LOGICAL,
.dir = STEDMA40_MEM_TO_PERIPH,
.dev_type = DB8500_DMA_DEV42_SD_MM4,
- .src_info.data_width = STEDMA40_WORD_WIDTH,
- .dst_info.data_width = STEDMA40_WORD_WIDTH,
};
#endif

--
1.7.10.4


\
 
 \ /
  Last update: 2013-04-18 12:41    [W:2.490 / U:0.492 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site