lkml.org 
[lkml]   [2020]   [Dec]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.10 192/717] ARM: dts: at91: sam9x60: add pincontrol for USB Host
Date
From: Cristian Birsan <cristian.birsan@microchip.com>

[ Upstream commit 5ba6291086d2ae8006be9e0f19bf2001a85c9dc1 ]

The pincontrol node is needed for USB Host since Linux v5.7-rc1. Without
it the driver probes but VBus is not powered because of wrong pincontrol
configuration.

Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Signed-off-by: Cristian Birsan <cristian.birsan@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Link: https://lore.kernel.org/r/20201118120019.1257580-2-cristian.birsan@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/at91-sam9x60ek.dts | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index eae28b82c7fd0..0e3b6147069f9 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -569,6 +569,13 @@
atmel,pins = <AT91_PIOB 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
};
};
+
+ usb1 {
+ pinctrl_usb_default: usb_default {
+ atmel,pins = <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
+ AT91_PIOD 16 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
+ };
+ };
}; /* pinctrl */

&pmc {
@@ -684,6 +691,8 @@
atmel,vbus-gpio = <0
&pioD 15 GPIO_ACTIVE_HIGH
&pioD 16 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_default>;
status = "okay";
};

--
2.27.0


\
 
 \ /
  Last update: 2020-12-28 15:10    [W:1.899 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site