lkml.org 
[lkml]   [2022]   [Jun]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 210/237] i40e: Fix call trace in setup_tx_descriptors
Date
From: Aleksandr Loktionov <aleksandr.loktionov@intel.com>

[ Upstream commit fd5855e6b1358e816710afee68a1d2bc685176ca ]

After PF reset and ethtool -t there was call trace in dmesg
sometimes leading to panic. When there was some time, around 5
seconds, between reset and test there were no errors.

Problem was that pf reset calls i40e_vsi_close in prep_for_reset
and ethtool -t calls i40e_vsi_close in diag_test. If there was not
enough time between those commands the second i40e_vsi_close starts
before previous i40e_vsi_close was done which leads to crash.

Add check to diag_test if pf is in reset and don't start offline
tests if it is true.
Add netif_info("testing failed") into unhappy path of i40e_diag_test()

Fixes: e17bc411aea8 ("i40e: Disable offline diagnostics if VFs are enabled")
Fixes: 510efb2682b3 ("i40e: Fix ethtool offline diagnostic with netqueues")
Signed-off-by: Michal Jaron <michalx.jaron@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
.../net/ethernet/intel/i40e/i40e_ethtool.c | 25 +++++++++++++------
1 file changed, 17 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
index 751ac5616884..21648dab13e0 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c
@@ -1874,15 +1874,16 @@ static void i40e_diag_test(struct net_device *netdev,

set_bit(__I40E_TESTING, pf->state);

+ if (test_bit(__I40E_RESET_RECOVERY_PENDING, pf->state) ||
+ test_bit(__I40E_RESET_INTR_RECEIVED, pf->state)) {
+ dev_warn(&pf->pdev->dev,
+ "Cannot start offline testing when PF is in reset state.\n");
+ goto skip_ol_tests;
+ }
+
if (i40e_active_vfs(pf) || i40e_active_vmdqs(pf)) {
dev_warn(&pf->pdev->dev,
"Please take active VFs and Netqueues offline and restart the adapter before running NIC diagnostics\n");
- data[I40E_ETH_TEST_REG] = 1;
- data[I40E_ETH_TEST_EEPROM] = 1;
- data[I40E_ETH_TEST_INTR] = 1;
- data[I40E_ETH_TEST_LINK] = 1;
- eth_test->flags |= ETH_TEST_FL_FAILED;
- clear_bit(__I40E_TESTING, pf->state);
goto skip_ol_tests;
}

@@ -1929,9 +1930,17 @@ static void i40e_diag_test(struct net_device *netdev,
data[I40E_ETH_TEST_INTR] = 0;
}

-skip_ol_tests:
-
netif_info(pf, drv, netdev, "testing finished\n");
+ return;
+
+skip_ol_tests:
+ data[I40E_ETH_TEST_REG] = 1;
+ data[I40E_ETH_TEST_EEPROM] = 1;
+ data[I40E_ETH_TEST_INTR] = 1;
+ data[I40E_ETH_TEST_LINK] = 1;
+ eth_test->flags |= ETH_TEST_FL_FAILED;
+ clear_bit(__I40E_TESTING, pf->state);
+ netif_info(pf, drv, netdev, "testing failed\n");
}

static void i40e_get_wol(struct net_device *netdev,
--
2.35.1


\
 
 \ /
  Last update: 2022-06-23 19:45    [W:0.558 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site