lkml.org 
[lkml]   [2022]   [Jun]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH Part2 v6 00/49] Add AMD Secure Nested Paging (SEV-SNP)
Date
From: Ashish Kalra <ashish.kalra@amd.com>

This part of the Secure Encrypted Paging (SEV-SNP) series focuses on the
changes required in a host OS for SEV-SNP support. The series builds upon
SEV-SNP Guest Support now part of mainline.

This series provides the basic building blocks to support booting the SEV-SNP
VMs, it does not cover all the security enhancement introduced by the SEV-SNP
such as interrupt protection.

The CCP driver is enhanced to provide new APIs that use the SEV-SNP
specific commands defined in the SEV-SNP firmware specification. The KVM
driver uses those APIs to create and managed the SEV-SNP guests.

The GHCB specification version 2 introduces new set of NAE's that is
used by the SEV-SNP guest to communicate with the hypervisor. The series
provides support to handle the following new NAE events:
- Register GHCB GPA
- Page State Change Request
- Hypevisor feature
- Guest message request

The RMP check is enforced as soon as SEV-SNP is enabled. Not every memory
access requires an RMP check. In particular, the read accesses from the
hypervisor do not require RMP checks because the data confidentiality is
already protected via memory encryption. When hardware encounters an RMP
checks failure, it raises a page-fault exception. If RMP check failure
is due to the page-size mismatch, then split the large page to resolve
the fault.

The series does not provide support for the interrupt security and migration
and those feature will be added after the base support.

Please note that some areas, such as how private guest pages are
managed/pinned/protected, are likely to change once Unmapped Private Memory
support is further along in development/design and can be incorporated
into this series. We are posting these patches without UPM support for now
to hopefully get some review on other aspects of the series in the meantime.

Here is a link to latest UPM v6 patches:
https://lore.kernel.org/linux-mm/20220519153713.819591-1-chao.p.peng@linux.intel.com/

A branch containing these patches is available here:
https://github.com/AMDESE/linux/tree/sev-snp-5.18-rc3-v3

Changes since v5:
* Rebase to 5.18.0-rc3, these patches are just for review so they
are based on 5.18.0-rc3 linux-next release as this included the
SNP guest patches which weren't in mainline then.
* Using kvm_write_guest() to sync the GHCB scratch buffer can fail
due to host mapping being 2M, but RMP being 4K. The page fault
handling in do_user_addr_fault() fails to split the 2M page to handle
RMP fault due it being called in a non-preemptible context. Instead,
use the already kernel mapped ghcb to sync the scratch buffer when
the scratch buffer is contained within the GHCB.
* warn and retry failed rmpupdates.
* Fix for stale per-cpu pointer due to cond_resched due during
ghcb mapping.
* Multiple fixes for SEV-SNP AP Creation.
* Remove SRCU to synchronize the PSC and gfn mapping replacing it
with a spinlock.
* Remove generic post_{map,unmap}_gfn ops, need to revisit these
later with respect to UPM support.
* Fix kvm_mmu_get_tdp_walk() to handle "suspicious RCU usage"
warning.
* Fix sev_snp_init() to do WBINVD/DF_FLUSH command after SNP_INIT
command has been issued.
* Fix sev_free_vcpu() to flush the VMSA page after it is transitioned
back to hypervisor state and restored in the kernel direct map.

Changes since v4:
* Move the RMP entry definition to x86 specific header file.
* Move the dump RMP entry function to SEV specific file.
* Use BIT_ULL while defining the #PF bit fields.
* Add helper function to check the IOMMU support for SEV-SNP feature.
* Add helper functions for the page state transition.
* Map and unmap the pages from the direct map after page is added or
removed in RMP table.
* Enforce the minimum SEV-SNP firmware version.
* Extend the LAUNCH_UPDATE to accept the base_gfn and remove the
logic to calculate the gfn from the hva.
* Add a check in LAUNCH_UPDATE to ensure that all the pages are
shared before calling the PSP.
* Mark the memory failure when failing to remove the page from the
RMP table or clearing the immutable bit.
* Exclude the encrypted hva range from the KSM.
* Remove the gfn tracking during the kvm_gfn_map() and use SRCU to
syncronize the PSC and gfn mapping.
* Allow PSC on the registered hva range only.
* Add support for the Preferred GPA VMGEXIT.
* Simplify the PSC handling routines.
* Use the static_call() for the newly added kvm_x86_ops.
* Remove the long-lived GHCB map.
* Move the snp enable module parameter to the end of the file.
* Remove the kvm_x86_op for the RMP fault handling. Call the
fault handler directly from the #NPF interception.

Changes since v3:
* Add support for extended guest message request.
* Add ioctl to query the SNP Platform status.
* Add ioctl to get and set the SNP config.
* Add check to verify that memory reserved for the RMP covers the full system RAM.
* Start the SNP specific commands from 256 instead of 255.
* Multiple cleanup and fixes based on the review feedback.

Changes since v2:
* Add AP creation support.
* Drop the patch to handle the RMP fault for the kernel address.
* Add functions to track the write access from the hypervisor.
* Do not enable the SNP feature when IOMMU is disabled or is in passthrough mode.
* Dump the RMP entry on RMP violation for the debug.
* Shorten the GHCB macro names.
* Start the SNP_INIT command id from 255 to give some gap for the legacy SEV.
* Sync the header with the latest 0.9 SNP spec.

Changes since v1:
* Add AP reset MSR protocol VMGEXIT NAE.
* Add Hypervisor features VMGEXIT NAE.
* Move the RMP table initialization and RMPUPDATE/PSMASH helper in
arch/x86/kernel/sev.c.
* Add support to map/unmap SEV legacy command buffer to firmware state when
SNP is active.
* Enhance PSP driver to provide helper to allocate/free memory used for the
firmware context page.
* Add support to handle RMP fault for the kernel address.
* Add support to handle GUEST_REQUEST NAE event for attestation.
* Rename RMP table lookup helper.
* Drop typedef from rmpentry struct definition.
* Drop SNP static key and use cpu_feature_enabled() to check whether SEV-SNP
is active.
* Multiple cleanup/fixes to address Boris review feedback.


Ashish Kalra (1):
KVM: SVM: Sync the GHCB scratch buffer using already mapped ghcb

Brijesh Singh (42):
x86/cpufeatures: Add SEV-SNP CPU feature
iommu/amd: Introduce function to check SEV-SNP support
x86/sev: Add the host SEV-SNP initialization support
x86/sev: set SYSCFG.MFMD
x86/sev: Add RMP entry lookup helpers
x86/sev: Add helper functions for RMPUPDATE and PSMASH instruction
x86/sev: Invalid pages from direct map when adding it to RMP table
x86/traps: Define RMP violation #PF error code
x86/fault: Add support to handle the RMP fault for user address
x86/fault: Add support to dump RMP entry on fault
crypto:ccp: Define the SEV-SNP commands
crypto: ccp: Add support to initialize the AMD-SP for SEV-SNP
crypto:ccp: Provide APIs to issue SEV-SNP commands
crypto: ccp: Handle the legacy TMR allocation when SNP is enabled
crypto: ccp: Handle the legacy SEV command when SNP is enabled
crypto: ccp: Add the SNP_PLATFORM_STATUS command
crypto: ccp: Add the SNP_{SET,GET}_EXT_CONFIG command
crypto: ccp: Provide APIs to query extended attestation report
KVM: SVM: Provide the Hypervisor Feature support VMGEXIT
KVM: SVM: Make AVIC backing, VMSA and VMCB memory allocation SNP safe
KVM: SVM: Add initial SEV-SNP support
KVM: SVM: Add KVM_SNP_INIT command
KVM: SVM: Add KVM_SEV_SNP_LAUNCH_START command
KVM: SVM: Disallow registering memory range from HugeTLB for SNP guest
KVM: SVM: Add KVM_SEV_SNP_LAUNCH_UPDATE command
KVM: SVM: Mark the private vma unmerable for SEV-SNP guests
KVM: SVM: Add KVM_SEV_SNP_LAUNCH_FINISH command
KVM: X86: Keep the NPT and RMP page level in sync
KVM: x86: Introduce kvm_mmu_get_tdp_walk() for SEV-SNP use
KVM: x86: Define RMP page fault error bits for #NPF
KVM: x86: Update page-fault trace to log full 64-bit error code
KVM: SVM: Do not use long-lived GHCB map while setting scratch area
KVM: SVM: Remove the long-lived GHCB host map
KVM: SVM: Add support to handle GHCB GPA register VMGEXIT
KVM: SVM: Add support to handle MSR based Page State Change VMGEXIT
KVM: SVM: Add support to handle Page State Change VMGEXIT
KVM: SVM: Introduce ops for the post gfn map and unmap
KVM: x86: Export the kvm_zap_gfn_range() for the SNP use
KVM: SVM: Add support to handle the RMP nested page fault
KVM: SVM: Provide support for SNP_GUEST_REQUEST NAE event
KVM: SVM: Add module parameter to enable the SEV-SNP
ccp: add support to decrypt the page

Michael Roth (2):
*fix for stale per-cpu pointer due to cond_resched during ghcb
mapping
*debug: warn and retry failed rmpupdates

Sean Christopherson (1):
KVM: x86/mmu: Introduce kvm_mmu_map_tdp_page() for use by TDX and SNP

Tom Lendacky (3):
KVM: SVM: Add support to handle AP reset MSR protocol
KVM: SVM: Use a VMSA physical address variable for populating VMCB
KVM: SVM: Support SEV-SNP AP Creation NAE event

Documentation/virt/coco/sevguest.rst | 54 +
.../virt/kvm/x86/amd-memory-encryption.rst | 102 +
arch/x86/include/asm/cpufeatures.h | 1 +
arch/x86/include/asm/disabled-features.h | 8 +-
arch/x86/include/asm/kvm-x86-ops.h | 2 +
arch/x86/include/asm/kvm_host.h | 15 +
arch/x86/include/asm/msr-index.h | 9 +
arch/x86/include/asm/sev-common.h | 28 +
arch/x86/include/asm/sev.h | 45 +
arch/x86/include/asm/svm.h | 6 +
arch/x86/include/asm/trap_pf.h | 18 +-
arch/x86/kernel/cpu/amd.c | 3 +-
arch/x86/kernel/sev.c | 400 ++++
arch/x86/kvm/lapic.c | 5 +-
arch/x86/kvm/mmu.h | 7 +-
arch/x86/kvm/mmu/mmu.c | 90 +
arch/x86/kvm/svm/sev.c | 1703 ++++++++++++++++-
arch/x86/kvm/svm/svm.c | 62 +-
arch/x86/kvm/svm/svm.h | 75 +-
arch/x86/kvm/trace.h | 40 +-
arch/x86/kvm/x86.c | 10 +-
arch/x86/mm/fault.c | 84 +-
drivers/crypto/ccp/sev-dev.c | 908 ++++++++-
drivers/crypto/ccp/sev-dev.h | 17 +
drivers/iommu/amd/init.c | 30 +
include/linux/iommu.h | 9 +
include/linux/mm.h | 3 +-
include/linux/mm_types.h | 3 +
include/linux/psp-sev.h | 346 ++++
include/linux/sev.h | 32 +
include/uapi/linux/kvm.h | 56 +
include/uapi/linux/psp-sev.h | 60 +
mm/memory.c | 13 +
tools/arch/x86/include/asm/cpufeatures.h | 1 +
34 files changed, 4090 insertions(+), 155 deletions(-)
create mode 100644 include/linux/sev.h

--
2.25.1

\
 
 \ /
  Last update: 2022-06-21 01:00    [W:1.576 / U:0.512 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site