lkml.org 
[lkml]   [2023]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [RFC PATCH 03/25] kvx: Add build infrastructure
From
Hi,

On 1/3/23 08:43, Yann Sionneau wrote:
> Add Kbuild, Makefile, Kconfig and link script for kvx build infrastructure.
>
> CC: linux-kernel@vger.kernel.org
> CC: bpf@vger.kernel.org
> Co-developed-by: Clement Leger <clement.leger@bootlin.com>
> Signed-off-by: Clement Leger <clement.leger@bootlin.com>
> Co-developed-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
> Signed-off-by: Guillaume Thouvenin <gthouvenin@kalray.eu>
> Co-developed-by: Jonathan Borne <jborne@kalray.eu>
> Signed-off-by: Jonathan Borne <jborne@kalray.eu>
> Co-developed-by: Jules Maselbas <jmaselbas@kalray.eu>
> Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
> Co-developed-by: Julian Vetter <jvetter@kalray.eu>
> Signed-off-by: Julian Vetter <jvetter@kalray.eu>
> Co-developed-by: Marc Poulhiès <dkm@kataplop.net>
> Signed-off-by: Marc Poulhiès <dkm@kataplop.net>
> Co-developed-by: Marius Gligor <mgligor@kalray.eu>
> Signed-off-by: Marius Gligor <mgligor@kalray.eu>
> Co-developed-by: Samuel Jones <sjones@kalray.eu>
> Signed-off-by: Samuel Jones <sjones@kalray.eu>
> Co-developed-by: Vincent Chardon <vincent.chardon@elsys-design.com>
> Signed-off-by: Vincent Chardon <vincent.chardon@elsys-design.com>
> Co-developed-by: Yann Sionneau <ysionneau@kalray.eu>
> Signed-off-by: Yann Sionneau <ysionneau@kalray.eu>
> ---
> arch/kvx/Kconfig | 249 +++++++++++++++++++++++++++++++
> arch/kvx/Kconfig.debug | 70 +++++++++
> arch/kvx/Makefile | 52 +++++++
> arch/kvx/include/asm/Kbuild | 20 +++
> arch/kvx/include/uapi/asm/Kbuild | 1 +
> arch/kvx/kernel/Makefile | 27 ++++
> arch/kvx/kernel/kvx_ksyms.c | 24 +++
> arch/kvx/kernel/vmlinux.lds.S | 173 +++++++++++++++++++++
> arch/kvx/lib/Makefile | 6 +
> arch/kvx/mm/Makefile | 10 ++
> arch/kvx/platform/Makefile | 7 +
> 11 files changed, 639 insertions(+)
> create mode 100644 arch/kvx/Kconfig
> create mode 100644 arch/kvx/Kconfig.debug
> create mode 100644 arch/kvx/Makefile
> create mode 100644 arch/kvx/include/asm/Kbuild
> create mode 100644 arch/kvx/include/uapi/asm/Kbuild
> create mode 100644 arch/kvx/kernel/Makefile
> create mode 100644 arch/kvx/kernel/kvx_ksyms.c
> create mode 100644 arch/kvx/kernel/vmlinux.lds.S
> create mode 100644 arch/kvx/lib/Makefile
> create mode 100644 arch/kvx/mm/Makefile
> create mode 100644 arch/kvx/platform/Makefile
>
> diff --git a/arch/kvx/Kconfig b/arch/kvx/Kconfig
> new file mode 100644
> index 000000000000..8e8820c5c860
> --- /dev/null
> +++ b/arch/kvx/Kconfig
> @@ -0,0 +1,249 @@
> +#
> +# For a description of the syntax of this configuration file,
> +# see Documentation/kbuild/kconfig-language.txt.
> +#
> +
> +config 64BIT
> + def_bool y
> +
> +config GENERIC_CALIBRATE_DELAY
> + def_bool y
> +
> +config FIX_EARLYCON_MEM
> + def_bool y
> +
> +config MMU
> + def_bool y
> +
> +config KALLSYMS_BASE_RELATIVE
> + def_bool n
> +
> +config GENERIC_CSUM
> + def_bool y
> +
> +config RWSEM_GENERIC_SPINLOCK
> + def_bool y
> +
> +config GENERIC_HWEIGHT
> + def_bool y
> +
> +config ARCH_MMAP_RND_BITS_MAX
> + default 24
> +

Do the above and below configs need an "int" line for their type?
I notice that the patch does that below for PGTABLE_LEVELS.

> +config ARCH_MMAP_RND_BITS_MIN
> + default 18
> +
> +config STACKTRACE_SUPPORT
> + def_bool y
> +
> +config LOCKDEP_SUPPORT
> + def_bool y
> +
> +config GENERIC_BUG
> + def_bool y
> + depends on BUG
> +
> +config KVX_4K_PAGES
> + def_bool y
> +
> +config KVX
> + def_bool y
[deletes]
> +
> +config PGTABLE_LEVELS
> + int
> + default 3
^^^^^^^^^^^^^^^^^^^^^^^^

> +
> +config HAVE_KPROBES
> + def_bool n
> +
> +menu "System setup"
> +
> +config POISON_INITMEM
> + bool "Enable to poison freed initmem"
> + default y
> + help
> + In order to debug initmem, using poison allows to verify if
> + some data/code is stille using them. Enable this for debug

still

> + purposes

purposes.

> +
> +config KVX_PHYS_OFFSET
> + hex "RAM address of memory base"
> + default 0x100000000
> +
> +config KVX_PAGE_OFFSET
> + hex "kernel virtual address of memory base"
> + default 0xFFFFFF8000000000
> +
> +config ARCH_FLATMEM_ENABLE
> + def_bool y
> +
> +config ARCH_SPARSEMEM_ENABLE
> + def_bool y
> +
> +config ARCH_SPARSEMEM_DEFAULT
> + def_bool ARCH_SPARSEMEM_ENABLE
> +
> +config ARCH_SELECT_MEMORY_MODEL
> + def_bool ARCH_SPARSEMEM_ENABLE
> +
> +config STACK_MAX_DEPTH_TO_PRINT
> + int "Maximum depth of stack to print"
> + range 1 128
> + default "24"
> +
> +config L2_CACHE
> + bool "Enable l2 cache driver"

L2

> + default y
> + help
> + Enable L2 cache driver in order to handle it. This driver can be
> + disabled to eliminate any overhead related to L2 cache
> + inval/writeback. Note that L2 cache is mandatory for SMP in order
> + to maintain coherency on DDR between all PEs.
> +
> +config SECURE_DAME_HANDLING
> + bool "Secure DAME handling"
> + default y
> + help
> + In order to securely handle Data Asynchronous Memory Errors, we need
> + to do a barrier upon kernel entry when coming from userspace. This
> + barrier guarantee us that any pending DAME will be serviced right

guarantees

> + away. We also need to do a barrier when returning from kernel to user.
> + This way, if the kernel or the user triggered a DAME, it will be
> + serviced by knowing we are coming from kernel or user and avoid
> + pulling the wrong lever (panic for kernel or sigfault for user).
> + This can be costly but ensure that user cannot interfere with kernel.

ensures

> + /!\ Do not disable unless you want to open a giant breach between
> + user and kernel /!\
> +
> +config CACHECTL_UNSAFE_PHYS_OPERATIONS
> + bool "Enable cachectl syscall unsafe physical operations"
> + default n
> + help
> + Enable cachectl syscall to allow writebacking/invalidating ranges
> + based on physical addresses. These operations requires the
> + CAP_SYS_ADMIN capability

capability.

> +
> +config ENABLE_TCA
> + bool "Enable TCA coprocessor support"
> + default y
> + help
> + This option enables TCA coprocessor support. It will allow the user to
> + use the coprocessor and save registers on context switch if used.
> + Registers content will also be cleared when switching.
> +
> +config SMP
> + bool "Symmetric multi-processing support"
> + default n
> + select GENERIC_SMP_IDLE_THREAD
> + select GENERIC_IRQ_IPI
> + select IRQ_DOMAIN_HIERARCHY
> + select IRQ_DOMAIN
> + select L2_CACHE
> + help
> + This enables support for systems with more than one CPU. If you have
> + a system with only one CPU, say N. If you have a system with more
> + than one CPU, say Y.
> +
> + If you say N here, the kernel will run on uni- and multiprocessor
> + machines, but will use only one CPU of a multiprocessor machine. If
> + you say Y here, the kernel will run on many, but not all,
> + uniprocessor machines. On a uniprocessor machine, the kernel
> + will run faster if you say N here.
> +
> +config NR_CPUS
> + int "Maximum number of CPUs"
> + range 1 16
> + default "16"
> + depends on SMP
> + help
> + Kalray support can handle a maximum of 16 CPUs.
> +
> +config KVX_PAGE_SHIFT
> + int
> + default 12
> +
> +config CMDLINE
> + string "Default kernel command string"
> + default ""
> + help
> + On some architectures there is currently no way for the boot loader
> + to pass arguments to the kernel. For these architectures, you should
> + supply some command-line options at build time by entering them
> + here.
> +
> +endmenu
> +
> +menu "Kernel Features"
> +source "kernel/Kconfig.hz"
> +endmenu
> diff --git a/arch/kvx/Kconfig.debug b/arch/kvx/Kconfig.debug
> new file mode 100644
> index 000000000000..027e919a1e14
> --- /dev/null
> +++ b/arch/kvx/Kconfig.debug
> @@ -0,0 +1,70 @@
> +menu "KVX debugging"
> +
> +config KVX_DEBUG_ASN
> + bool "Check ASN before writing TLB entry"
> + default n
> + help
> + This option allows to check if the ASN of the current
> + process is matching the ASN found in MMC. If it is not the

s/is matching/matches/

> + case an error will be printed.
> +
> +config KVX_DEBUG_TLB_WRITE
> + bool "Enable TLBs write checks"
> + default n
> + help
> + Enabling this option will enable TLB access checks. This is
> + particularly helpful when modifying the assembly code responsible
> + of TLB refill. If set, mmc.e will be checked each time the tlb are

for TLB refill. TLB

> + written and a panic will be thrown on error.
> +
> +config KVX_DEBUG_TLB_ACCESS
> + bool "Enable TLBs accesses logging"
> + default n
> + help
> + Enabling this option will enable TLB entry manipulation logging.
> + Each time an entry will be added to the TLBs, it will be logged in

s/will be/is/ s/will be/is/

> + an array readable via gdb scripts. This can be useful to understand
> + strange crashes related to suspicious virtual/physical addresses.
> +
> +config KVX_DEBUG_TLB_ACCESS_BITS
> + int "Number of bits used as index of entries in log table"
> + default 12
> + depends on KVX_DEBUG_TLB_ACCESS
> + help
> + Set the number of bits used as index of entries that will be logged
> + in a ring buffer called kvx_tlb_access. One entry in the table
> + contains registers TEL, TEH and MMC. It also logs the type of the
> + operations (0:read, 1:write, 2:probe). Buffer is per CPU. For one
> + entry 24 bytes are used. So by default it uses 96Ko of memory per

What does "Ko" mean?

> + CPU to store 2^12 (4096) entries.
> +
> +config KVX_MMU_STATS
> + bool "Register mmu stats debugfs entries"

Preferably MMU

> + default n
> + select DEBUG_FS

Preferably:
depends on DEBUG_FS

> + help
> + Enable debugfs attribute which will allow inspecting various metric

metrics

> + regarding MMU:
> + - Number of nomapping traps handled
> + - avg/min/max time for nomapping refill (user/kernel)
> +
> +config DEBUG_EXCEPTION_STACK
> + bool "Enable exception stack debugging"
> + default n
> + help
> + Enable stack check debugging when entering/exiting
> + exception handlers.
> + This can be particularly helpful after modifying stack
> + handling to see if stack when exiting is the same as the one
> + when entering exception handler.
> +
> +config DEBUG_SFR_SET_MASK
> + bool "Enable sfr set_mask debugging"
> + default n
> + help
> + Verify that values written using kvx_sfr_set_mask are matching the

s/are matching/match/

> + mask. This ensure that no extra bits of sfr will be overridden by some

ensures

and preferably s/sfr/SFR/ in 2 places (not in kvx_sfr_set_mask).

> + incorrectly truncated values. This can lead to huge problems by
> + modifying important bits in system registers.
> +
> +endmenu


Thanks.

--
~Randy

\
 
 \ /
  Last update: 2023-03-26 23:26    [W:0.577 / U:0.140 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site