lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 03/12] drm/mediatek: dpi: implement a CK/DE pol toggle in SoC config
From
Date
Hi, Bo-Chen:

On Mon, 2022-06-13 at 14:48 +0800, Bo-Chen Chen wrote:
> From: Guillaume Ranquet <granquet@baylibre.com>
>
> Dp_intf does not support CK/DE polarity because the polarity
> information
> is not used for eDP and DP while dp_intf is only for eDP and DP.
> Therefore, we add a bit of flexibility to support SoCs without CK/DE
> pol
> support.

Reviewed-by: CK Hu <ck.hu@mediatek.com>

>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> [Bo-Chen: Add modification reason in commit message.]
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> Reviewed-by: AngeloGioacchino Del Regno <
> angelogioacchino.delregno@collabora.com>
> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 22 +++++++++++++++++-----
> 1 file changed, 17 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index ce8c5eefe5f1..15218c1e8c11 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -125,6 +125,7 @@ struct mtk_dpi_conf {
> bool edge_sel_en;
> const u32 *output_fmts;
> u32 num_output_fmts;
> + bool is_ck_de_pol;
> const struct mtk_dpi_yc_limit *limit;
> };
>
> @@ -211,13 +212,20 @@ static void mtk_dpi_config_pol(struct mtk_dpi
> *dpi,
> struct mtk_dpi_polarities *dpi_pol)
> {
> unsigned int pol;
> + unsigned int mask;
>
> - pol = (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ? 0 : CK_POL)
> |
> - (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ? 0 : DE_POL)
> |
> - (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> HSYNC_POL) |
> + mask = HSYNC_POL | VSYNC_POL;
> + pol = (dpi_pol->hsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> HSYNC_POL) |
> (dpi_pol->vsync_pol == MTK_DPI_POLARITY_RISING ? 0 :
> VSYNC_POL);
> - mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol,
> - CK_POL | DE_POL | HSYNC_POL | VSYNC_POL);
> + if (dpi->conf->is_ck_de_pol) {
> + mask |= CK_POL | DE_POL;
> + pol |= (dpi_pol->ck_pol == MTK_DPI_POLARITY_RISING ?
> + 0 : CK_POL) |
> + (dpi_pol->de_pol == MTK_DPI_POLARITY_RISING ?
> + 0 : DE_POL);
> + }
> +
> + mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, pol, mask);
> }
>
> static void mtk_dpi_config_3d(struct mtk_dpi *dpi, bool en_3d)
> @@ -799,6 +807,7 @@ static const struct mtk_dpi_conf mt8173_conf = {
> .max_clock_khz = 300000,
> .output_fmts = mt8173_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
> @@ -809,6 +818,7 @@ static const struct mtk_dpi_conf mt2701_conf = {
> .max_clock_khz = 150000,
> .output_fmts = mt8173_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8173_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
> @@ -818,6 +828,7 @@ static const struct mtk_dpi_conf mt8183_conf = {
> .max_clock_khz = 100000,
> .output_fmts = mt8183_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>
> @@ -827,6 +838,7 @@ static const struct mtk_dpi_conf mt8192_conf = {
> .max_clock_khz = 150000,
> .output_fmts = mt8183_output_fmts,
> .num_output_fmts = ARRAY_SIZE(mt8183_output_fmts),
> + .is_ck_de_pol = true,
> .limit = &mtk_dpi_limit,
> };
>

\
 
 \ /
  Last update: 2022-06-14 05:37    [W:0.221 / U:0.428 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site