lkml.org 
[lkml]   [2022]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 10/12] drm/mediatek: dpi: Add dpintf support
From
Date
Hi, Bo-Chen:

On Mon, 2022-06-13 at 14:48 +0800, Bo-Chen Chen wrote:
> From: Guillaume Ranquet <granquet@baylibre.com>
>
> dpintf is the displayport interface hardware unit. This unit is
> similar
> to dpi and can reuse most of the code.
>
> This patch adds support for mt8195-dpintf to this dpi driver. Main
> differences are:
> - Some features/functional components are not available for dpintf
> which are now excluded from code execution once is_dpintf is set
> - dpintf can and needs to choose between different clockdividers
> based
> on the clockspeed. This is done by choosing a different clock
> parent.
> - There are two additional clocks that need to be managed. These are
> only set for dpintf and will be set to NULL if not supplied. The
> clk_* calls handle these as normal clocks then.
> - Some register contents differ slightly between the two components.
> To
> work around this I added register bits/masks with a DPINTF_ prefix
> and use them where different.
>
> Based on a separate driver for dpintf created by
> Jitao shi <jitao.shi@mediatek.com>.
>
> Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> [Bo-Chen: Modify reviewers' comments.]
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 115
> ++++++++++++++++++--
> drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 13 +++
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 4 +
> drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
> drivers/gpu/drm/mediatek/mtk_drm_drv.c | 3 +
> 5 files changed, 126 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 6b8cf648a5b5..08c8f21b4421 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -71,6 +71,7 @@ struct mtk_dpi {
> void __iomem *regs;
> struct device *dev;
> struct clk *engine_clk;
> + struct clk *pll_gate_clk;

Separate clock part to an independent patch.

> struct clk *pixel_clk;
> struct clk *tvd_clk;
> int irq;
> @@ -126,6 +127,7 @@ struct mtk_dpi_conf {
> const u32 *output_fmts;
> u32 num_output_fmts;
> bool is_ck_de_pol;
> + bool is_dpintf;
> bool swap_input_support;
> /* Mask used for HWIDTH, HPORCH, VSYNC_WIDTH and VSYNC_PORCH
> (no shift) */
> u32 dimension_mask;
> @@ -439,6 +441,8 @@ static void mtk_dpi_power_off(struct mtk_dpi
> *dpi)
> mtk_dpi_disable(dpi);
> clk_disable_unprepare(dpi->pixel_clk);
> clk_disable_unprepare(dpi->engine_clk);
> + clk_disable_unprepare(dpi->pll_gate_clk);
> + clk_disable_unprepare(dpi->tvd_clk);
> }
>
> static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> @@ -448,10 +452,23 @@ static int mtk_dpi_power_on(struct mtk_dpi
> *dpi)
> if (++dpi->refcount != 1)
> return 0;
>
> + ret = clk_prepare_enable(dpi->tvd_clk);
> + if (ret) {
> + dev_err(dpi->dev, "Failed to enable tvd pll: %d\n",
> ret);
> + goto err_refcount;
> + }
> +
> ret = clk_prepare_enable(dpi->engine_clk);
> if (ret) {
> dev_err(dpi->dev, "Failed to enable engine clock:
> %d\n", ret);
> - goto err_refcount;
> + goto err_engine;
> + }
> +
> + ret = clk_prepare_enable(dpi->pll_gate_clk);
> + if (ret) {
> + dev_err(dpi->dev,
> + "Failed to enable pll_gate_clk clock: %d\n",
> ret);
> + goto err_ck_cg;
> }
>
> ret = clk_prepare_enable(dpi->pixel_clk);
> @@ -467,7 +484,11 @@ static int mtk_dpi_power_on(struct mtk_dpi *dpi)
> return 0;
>
> err_pixel:
> + clk_disable_unprepare(dpi->pll_gate_clk);
> +err_ck_cg:
> clk_disable_unprepare(dpi->engine_clk);
> +err_engine:
> + clk_disable_unprepare(dpi->tvd_clk);
> err_refcount:
> dpi->refcount--;
> return ret;
> @@ -498,12 +519,16 @@ static int mtk_dpi_set_display_mode(struct
> mtk_dpi *dpi,
> pll_rate = clk_get_rate(dpi->tvd_clk);
>
> vm.pixelclock = pll_rate / factor;
> +
> + if (dpi->conf->is_dpintf)
> + vm.pixelclock /= 4;

Separate this to an independent patch and explain why do this.

> +
> if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
> - (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
> + (dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
> clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
> - else
> + } else {

This modification is not necessary.

> clk_set_rate(dpi->pixel_clk, vm.pixelclock);
> -
> + }
>
> vm.pixelclock = clk_get_rate(dpi->pixel_clk);
>
> @@ -516,9 +541,21 @@ static int mtk_dpi_set_display_mode(struct
> mtk_dpi *dpi,
> MTK_DPI_POLARITY_FALLING :
> MTK_DPI_POLARITY_RISING;
> dpi_pol.vsync_pol = vm.flags & DISPLAY_FLAGS_VSYNC_HIGH ?
> MTK_DPI_POLARITY_FALLING :
> MTK_DPI_POLARITY_RISING;
> +

This modification is not necessary.

> hsync.sync_width = vm.hsync_len;
> hsync.back_porch = vm.hback_porch;
> hsync.front_porch = vm.hfront_porch;
> +
> + /*
> + * For dp_intf, we need to divide everything by 4 because it's
> + * 4 pixels for one round while dpi is 1 pixel for one round.
> + */
> + if (dpi->conf->is_dpintf) {

I this this should define dpi->conf->round_pixels rather than dpi-
>conf->is_dpintf.

> + hsync.sync_width = vm.hsync_len / 4;
> + hsync.back_porch = vm.hback_porch / 4;
> + hsync.front_porch = vm.hfront_porch / 4;
> + }
> +
> hsync.shift_half_line = false;
> vsync_lodd.sync_width = vm.vsync_len;
> vsync_lodd.back_porch = vm.vback_porch;
> @@ -560,13 +597,20 @@ static int mtk_dpi_set_display_mode(struct
> mtk_dpi *dpi,
> mtk_dpi_config_channel_limit(dpi);
> mtk_dpi_config_bit_num(dpi, dpi->bit_num);
> mtk_dpi_config_channel_swap(dpi, dpi->channel_swap);
> - mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> mtk_dpi_config_color_format(dpi, dpi->color_format);
> - mtk_dpi_config_2n_h_fre(dpi);
> - mtk_dpi_dual_edge(dpi);
> - mtk_dpi_config_disable_edge(dpi);
> + if (dpi->conf->is_dpintf) {

Separate this to an independent patch and give a better config name
rather than dpi->conf->is_dpintf.

> + mtk_dpi_mask(dpi, DPI_CON, DPINTF_INPUT_2P_EN,
> + DPINTF_INPUT_2P_EN);
> + } else {
> + mtk_dpi_config_yc_map(dpi, dpi->yc_map);
> + mtk_dpi_config_2n_h_fre(dpi);
> + mtk_dpi_dual_edge(dpi);
> + mtk_dpi_config_disable_edge(dpi);
> + }
> mtk_dpi_sw_reset(dpi, false);
>
> + mtk_dpi_enable(dpi);

Why do this? If this is necessary, separate this to an independent
patch.

> +
> return 0;
> }
>
> @@ -643,7 +687,10 @@ static int mtk_dpi_bridge_atomic_check(struct
> drm_bridge *bridge,
> dpi->bit_num = MTK_DPI_OUT_BIT_NUM_8BITS;
> dpi->channel_swap = MTK_DPI_OUT_CHANNEL_SWAP_RGB;
> dpi->yc_map = MTK_DPI_OUT_YC_MAP_RGB;
> - dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
> + if (out_bus_format == MEDIA_BUS_FMT_YUYV8_1X16)
> + dpi->color_format =
> MTK_DPI_COLOR_FORMAT_YCBCR_422_FULL;

Separate this to an independent patch.

> + else
> + dpi->color_format = MTK_DPI_COLOR_FORMAT_RGB;
>
> return 0;
> }
> @@ -688,7 +735,7 @@ mtk_dpi_bridge_mode_valid(struct drm_bridge
> *bridge,
> {
> struct mtk_dpi *dpi = bridge_to_dpi(bridge);
>
> - if (mode->clock > dpi->conf->max_clock_khz)
> + if (dpi->conf->max_clock_khz && mode->clock > dpi->conf-
> >max_clock_khz)

Why dp_intf has no max_clock_khz?

Regards,
CK

> return MODE_CLOCK_HIGH;
>
> return MODE_OK;
> @@ -802,6 +849,16 @@ static unsigned int mt8183_calculate_factor(int
> clock)
> return 2;
> }
>
> +static unsigned int mt8195_dpintf_calculate_factor(int clock)
> +{
> + if (clock < 70000)
> + return 4;
> + else if (clock < 200000)
> + return 2;
> + else
> + return 1;
> +}
> +
> static const u32 mt8173_output_fmts[] = {
> MEDIA_BUS_FMT_RGB888_1X24,
> };
> @@ -811,6 +868,12 @@ static const u32 mt8183_output_fmts[] = {
> MEDIA_BUS_FMT_RGB888_2X12_BE,
> };
>
> +static const u32 mt8195_output_fmts[] = {
> + MEDIA_BUS_FMT_RGB888_1X24,
> + MEDIA_BUS_FMT_YUV8_1X24,
> + MEDIA_BUS_FMT_YUYV8_1X16,
> +};
> +
> static const struct mtk_dpi_yc_limit mtk_dpi_limit = {
> .c_bottom = 0x0010,
> .c_top = 0x0FE0,
> @@ -818,6 +881,13 @@ static const struct mtk_dpi_yc_limit
> mtk_dpi_limit = {
> .y_top = 0x0FE0,
> };
>
> +static const struct mtk_dpi_yc_limit mtk_dpintf_limit = {
> + .c_bottom = 0x0000,
> + .c_top = 0xFFF,
> + .y_bottom = 0x0000,
> + .y_top = 0xFFF,
> +};
> +
> static const struct mtk_dpi_conf mt8173_conf = {
> .cal_factor = mt8173_calculate_factor,
> .reg_h_fre_con = 0xe0,
> @@ -883,6 +953,19 @@ static const struct mtk_dpi_conf mt8192_conf = {
> .limit = &mtk_dpi_limit,
> };
>
> +static const struct mtk_dpi_conf mt8195_dpintf_conf = {
> + .cal_factor = mt8195_dpintf_calculate_factor,
> + .output_fmts = mt8195_output_fmts,
> + .num_output_fmts = ARRAY_SIZE(mt8195_output_fmts),
> + .is_dpintf = true,
> + .dimension_mask = DPINTF_HPW_MASK,
> + .hvsize_mask = DPINTF_HSIZE_MASK,
> + .channel_swap_shift = DPINTF_CH_SWAP,
> + .yuv422_en_bit = DPINTF_YUV422_EN,
> + .csc_enable_bit = DPINTF_CSC_ENABLE,
> + .limit = &mtk_dpintf_limit,
> +};
> +
> static int mtk_dpi_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -935,6 +1018,15 @@ static int mtk_dpi_probe(struct platform_device
> *pdev)
> return ret;
> }
>
> + dpi->pll_gate_clk = devm_clk_get_optional(dev, "pll_gate");
> + if (IS_ERR(dpi->pll_gate_clk)) {
> + ret = PTR_ERR(dpi->pll_gate_clk);
> + if (ret != -EPROBE_DEFER)
> + dev_err(dev, "Failed to get dpi ck cg clock:
> %d\n", ret);
> +
> + return ret;
> + }
> +
> dpi->pixel_clk = devm_clk_get(dev, "pixel");
> if (IS_ERR(dpi->pixel_clk)) {
> ret = PTR_ERR(dpi->pixel_clk);
> @@ -1005,6 +1097,9 @@ static const struct of_device_id
> mtk_dpi_of_ids[] = {
> { .compatible = "mediatek,mt8192-dpi",
> .data = &mt8192_conf,
> },
> + { .compatible = "mediatek,mt8195-dp_intf",
> + .data = &mt8195_dpintf_conf,
> + },
> { },
> };
> MODULE_DEVICE_TABLE(of, mtk_dpi_of_ids);
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> index 3a02fabe1662..f7f0272dbd6a 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi_regs.h
> @@ -40,9 +40,13 @@
> #define FAKE_DE_LEVEN BIT(21)
> #define FAKE_DE_RODD BIT(22)
> #define FAKE_DE_REVEN BIT(23)
> +#define DPINTF_YUV422_EN BIT(24)
> +#define DPINTF_CSC_ENABLE BIT(26)
> +#define DPINTF_INPUT_2P_EN BIT(29)
>
> #define DPI_OUTPUT_SETTING 0x14
> #define CH_SWAP 0
> +#define DPINTF_CH_SWAP 1
> #define CH_SWAP_MASK (0x7 << 0)
> #define SWAP_RGB 0x00
> #define SWAP_GBR 0x01
> @@ -80,8 +84,10 @@
> #define DPI_SIZE 0x18
> #define HSIZE 0
> #define HSIZE_MASK (0x1FFF << 0)
> +#define DPINTF_HSIZE_MASK (0xFFFF << 0)
> #define VSIZE 16
> #define VSIZE_MASK (0x1FFF << 16)
> +#define DPINTF_VSIZE_MASK (0xFFFF << 16)
>
> #define DPI_DDR_SETTING 0x1C
> #define DDR_EN BIT(0)
> @@ -93,24 +99,30 @@
> #define DPI_TGEN_HWIDTH 0x20
> #define HPW 0
> #define HPW_MASK (0xFFF << 0)
> +#define DPINTF_HPW_MASK (0xFFFF << 0)
>
> #define DPI_TGEN_HPORCH 0x24
> #define HBP 0
> #define HBP_MASK (0xFFF << 0)
> +#define DPINTF_HBP_MASK (0xFFFF << 0)
> #define HFP 16
> #define HFP_MASK (0xFFF << 16)
> +#define DPINTF_HFP_MASK (0xFFFF << 16)
>
> #define DPI_TGEN_VWIDTH 0x28
> #define DPI_TGEN_VPORCH 0x2C
>
> #define VSYNC_WIDTH_SHIFT 0
> #define VSYNC_WIDTH_MASK (0xFFF << 0)
> +#define DPINTF_VSYNC_WIDTH_MASK (0xFFFF << 0)
> #define VSYNC_HALF_LINE_SHIFT 16
> #define VSYNC_HALF_LINE_MASK BIT(16)
> #define VSYNC_BACK_PORCH_SHIFT 0
> #define VSYNC_BACK_PORCH_MASK (0xFFF << 0)
> +#define DPINTF_VSYNC_BACK_PORCH_MASK (0xFFFF << 0)
> #define VSYNC_FRONT_PORCH_SHIFT 16
> #define VSYNC_FRONT_PORCH_MASK (0xFFF << 16)
> +#define DPINTF_VSYNC_FRONT_PORCH_MASK (0xFFFF << 16)
>
> #define DPI_BG_HCNTL 0x30
> #define BG_RIGHT (0x1FFF << 0)
> @@ -217,4 +229,5 @@
>
> #define EDGE_SEL_EN BIT(5)
> #define H_FRE_2N BIT(25)
> +
> #endif /* __MTK_DPI_REGS_H */
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> index 2aab1e1eda36..5bef085714a1 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c
> @@ -427,6 +427,7 @@ static const char * const
> mtk_ddp_comp_stem[MTK_DDP_COMP_TYPE_MAX] = {
> [MTK_DISP_RDMA] = "rdma",
> [MTK_DISP_UFOE] = "ufoe",
> [MTK_DISP_WDMA] = "wdma",
> + [MTK_DP_INTF] = "dp-intf",
> [MTK_DPI] = "dpi",
> [MTK_DSI] = "dsi",
> };
> @@ -450,6 +451,8 @@ static const struct mtk_ddp_comp_match
> mtk_ddp_matches[DDP_COMPONENT_DRM_ID_MAX]
> [DDP_COMPONENT_DRM_OVL_ADAPTOR] = { MTK_DISP_OVL_ADAPTOR,
> 0, &ddp_ovl_adaptor },
> [DDP_COMPONENT_DSC0] = { MTK_DISP_DSC,
> 0, &ddp_dsc },
> [DDP_COMPONENT_DSC1] = { MTK_DISP_DSC,
> 1, &ddp_dsc },
> + [DDP_COMPONENT_DP_INTF0] = { MTK_DP_INTF, 0,
> &ddp_dpi },
> + [DDP_COMPONENT_DP_INTF1] = { MTK_DP_INTF, 1,
> &ddp_dpi },
> [DDP_COMPONENT_DSI0] = { MTK_DSI,
> 0, &ddp_dsi },
> [DDP_COMPONENT_DSI1] = { MTK_DSI,
> 1, &ddp_dsi },
> [DDP_COMPONENT_DSI2] = { MTK_DSI,
> 2, &ddp_dsi },
> @@ -575,6 +578,7 @@ int mtk_ddp_comp_init(struct device_node *node,
> struct mtk_ddp_comp *comp,
> type == MTK_DISP_PWM ||
> type == MTK_DISP_RDMA ||
> type == MTK_DPI ||
> + type == MTK_DP_INTF ||
> type == MTK_DSI)
> return 0;
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> index af9a6671f9c4..3084cc4e2830 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h
> @@ -38,6 +38,7 @@ enum mtk_ddp_comp_type {
> MTK_DISP_UFOE,
> MTK_DISP_WDMA,
> MTK_DPI,
> + MTK_DP_INTF,
> MTK_DSI,
> MTK_DDP_COMP_TYPE_MAX,
> };
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> index 78e79c8449c8..3b885ad61ac3 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_drv.c
> @@ -788,6 +788,8 @@ static const struct of_device_id
> mtk_ddp_comp_dt_ids[] = {
> .data = (void *)MTK_DPI },
> { .compatible = "mediatek,mt8192-dpi",
> .data = (void *)MTK_DPI },
> + { .compatible = "mediatek,mt8195-dp_intf",
> + .data = (void *)MTK_DP_INTF },
> { .compatible = "mediatek,mt2701-dsi",
> .data = (void *)MTK_DSI },
> { .compatible = "mediatek,mt8173-dsi",
> @@ -931,6 +933,7 @@ static int mtk_drm_probe(struct platform_device
> *pdev)
> comp_type == MTK_DISP_OVL_2L ||
> comp_type == MTK_DISP_OVL_ADAPTOR ||
> comp_type == MTK_DISP_RDMA ||
> + comp_type == MTK_DP_INTF ||
> comp_type == MTK_DPI ||
> comp_type == MTK_DSI) {
> dev_info(dev, "Adding component match for
> %pOF\n",

\
 
 \ /
  Last update: 2022-06-14 08:05    [W:0.193 / U:0.672 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site