lkml.org 
[lkml]   [2022]   [Jun]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v11 01/12] dt-bindings: mediatek,dpi: Add DP_INTF compatible
Date
From: Markus Schneider-Pargmann <msp@baylibre.com>

DP_INTF is similar to DPI but does not have the exact same feature set
or register layouts.

DP_INTF is the sink of the display pipeline that is connected to the
DisplayPort controller and encoder unit. It takes the same clocks as
DPI.

In this patch, we also do these string replacement:
- s/mediatek/MediaTek/ in title.
- s/Mediatek/MediaTek/ in description.

Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
---
.../bindings/display/mediatek/mediatek,dpi.yaml | 13 ++++++++-----
1 file changed, 8 insertions(+), 5 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
index 77ee1b923991..ca1b48e78581 100644
--- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
+++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml
@@ -4,16 +4,16 @@
$id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

-title: mediatek DPI Controller Device Tree Bindings
+title: MediaTek DPI and DP_INTF Controller

maintainers:
- CK Hu <ck.hu@mediatek.com>
- Jitao shi <jitao.shi@mediatek.com>

description: |
- The Mediatek DPI function block is a sink of the display subsystem and
- provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel
- output bus.
+ The MediaTek DPI and DP_INTF function blocks are a sink of the display
+ subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a
+ parallel output bus.

properties:
compatible:
@@ -24,6 +24,7 @@ properties:
- mediatek,mt8183-dpi
- mediatek,mt8186-dpi
- mediatek,mt8192-dpi
+ - mediatek,mt8195-dp_intf

reg:
maxItems: 1
@@ -36,12 +37,14 @@ properties:
- description: Pixel Clock
- description: Engine Clock
- description: DPI PLL
+ - description: Clock gate for PLL

clock-names:
items:
- const: pixel
- const: engine
- const: pll
+ - const: pll_gate

pinctrl-0: true
pinctrl-1: true
@@ -55,7 +58,7 @@ properties:
$ref: /schemas/graph.yaml#/properties/port
description:
Output port node. This port should be connected to the input port of an
- attached HDMI or LVDS encoder chip.
+ attached HDMI, LVDS or DisplayPort encoder chip.

required:
- compatible
--
2.18.0
\
 
 \ /
  Last update: 2022-06-13 08:49    [W:0.239 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site