lkml.org 
[lkml]   [2022]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v11 10/12] drm/mediatek: dpi: Add dpintf support
From
Date
On Mon, 2022-06-13 at 12:55 +0200, AngeloGioacchino Del Regno wrote:
> Il 13/06/22 08:48, Bo-Chen Chen ha scritto:
> > From: Guillaume Ranquet <granquet@baylibre.com>
> >
> > dpintf is the displayport interface hardware unit. This unit is
> > similar
> > to dpi and can reuse most of the code.
> >
> > This patch adds support for mt8195-dpintf to this dpi driver. Main
> > differences are:
> > - Some features/functional components are not available for
> > dpintf
> > which are now excluded from code execution once is_dpintf is
> > set
> > - dpintf can and needs to choose between different clockdividers
> > based
> > on the clockspeed. This is done by choosing a different clock
> > parent.
> > - There are two additional clocks that need to be managed. These
> > are
> > only set for dpintf and will be set to NULL if not supplied.
> > The
> > clk_* calls handle these as normal clocks then.
> > - Some register contents differ slightly between the two
> > components. To
> > work around this I added register bits/masks with a DPINTF_
> > prefix
> > and use them where different.
> >
> > Based on a separate driver for dpintf created by
> > Jitao shi <jitao.shi@mediatek.com>.
> >
> > Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
> > Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
> > [Bo-Chen: Modify reviewers' comments.]
> > Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
> > ---
> > drivers/gpu/drm/mediatek/mtk_dpi.c | 115
> > ++++++++++++++++++--
> > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 13 +++
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.c | 4 +
> > drivers/gpu/drm/mediatek/mtk_drm_ddp_comp.h | 1 +
> > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 3 +
> > 5 files changed, 126 insertions(+), 10 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > index 6b8cf648a5b5..08c8f21b4421 100644
> > --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> > +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> > @@ -71,6 +71,7 @@ struct mtk_dpi {
> > void __iomem *regs;
> > struct device *dev;
> > struct clk *engine_clk;
> > + struct clk *pll_gate_clk;
>
> You don't need this clock in this driver, at all.
>
> `pll_gate` would be CLK_VDO0_DP_INTF0_DP_INTF (parent = CLK_TOP_EDP);
>
> Currently, you're assigning CLK_TOP_EDP to "pixel", but you can, at
> this point,
> simply assign CLK_VDO0_DP_INTF0_DP_INTF to "pixel" instead... as when
> you call
> clk_prepare_enable() on it, that'll also take care of enabling its
> CLK_TOP_EDP
> parent for you.
>
> You're not doing anything special if not taking care of
> enabling/disabling it.
>
> Regards,
> Angelo
>

Hello Angelo,

Thanks for advice. I can use your patch[1] to do this and verify ok.
I will remove pll_gate_clk in next version.

[1]:
https://patchwork.kernel.org/project/linux-mediatek/patch/20220614091020.21472-1-angelogioacchino.delregno@collabora.com/

BRs,
Bo-Chen

\
 
 \ /
  Last update: 2022-06-16 09:58    [W:0.374 / U:0.276 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site