lkml.org 
[lkml]   [2020]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v5 0/8] media: i2c: Add RDACM21 camera module
Hi Kieran

On Wed, Nov 18, 2020 at 01:34:54PM +0000, Kieran Bingham wrote:
> Hi Jacopo,
>
> On 16/11/2020 13:52, Jacopo Mondi wrote:
> > Hello,
> > this v5 mostly changes how the rdacm21 driver handles writes to the
> > OV490 chip by handling the 'high' part of the sensor register through an
> > helper function as suggested by Kieran and Laurent.
> >
> > The diff is available at:
> > https://paste.debian.net/1172700/
> >
> > Minor fixes in patches subjects and in bindings as reported by Sergei and
> > Kieran.
> >
> > Bindings have now been sent to DT people now that they've been reviewed
> > by Kieran.
> >
> > v4: https://patchwork.linuxtv.org/project/linux-media/list/?series=3847
> > v3: https://patchwork.linuxtv.org/project/linux-media/list/?series=3657
> >
> > Background in v1 cover letter:
> > https://www.spinics.net/lists/linux-renesas-soc/msg52886.html
> >
> > I have tested on Eagle V3M with 4 RDACM21, but the whole point of
> > this series is to retain compatibility with RDACM20.
> >
> > For this reason I have included 2 patches on top, not intended for merge
> > that re-propose DTS support for the MAXIM max9286 expansion board connected
> > to Salvator-X and add the newly introduced property to the DTS file.
> >
> > Kieran, I know you have a working setup with RDACM20, the final patches are
> > meant for ease your testing. Can you give this series a spin ?
>
>
> After some rabbit-holes :-D:
>
> A 5-camera capture on Salvator-X - https://pasteboard.co/JAW0PSr.png
> For this series, on both Eagle-V3M and Salvator-X
>
> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>

Thanks!

>
>
>
> > Series based on latest renesas-drivers tag: renesas-drivers-2020-11-10-v5.10-rc3
> >
> > Thanks
> > j
> >
> > Jacopo Mondi (7):
> > media: i2c: Add driver for RDACM21 camera module
> > dt-bindings: media: max9286: Document
> > 'maxim,initial-reverse-channel-mV'
> > media: i2c: max9286: Break-out reverse channel setup
> > media: i2c: max9286: Make channel amplitude programmable
> > media: i2c: max9286: Configure reverse channel amplitude
> > [DNI] arm64: dts: renesas: salvator-x-max9286: Specify channel
> > amplitude
> > [DNI] arm64: dts: renesas: eagle: Specify channel amplitude
> >
> > Laurent Pinchart (1):
> > arm64: dts: renesas: salvator-x: Add MAX9286 expansion board
> >
> > .../bindings/media/i2c/maxim,max9286.yaml | 23 +
> > MAINTAINERS | 12 +
> > .../arm64/boot/dts/renesas/r8a77970-eagle.dts | 1 +
> > .../boot/dts/renesas/salvator-x-max9286.dtsi | 396 ++++++++++++
> > drivers/media/i2c/Kconfig | 13 +
> > drivers/media/i2c/Makefile | 2 +
> > drivers/media/i2c/max9286.c | 58 +-
> > drivers/media/i2c/rdacm21.c | 595 ++++++++++++++++++
> > 8 files changed, 1087 insertions(+), 13 deletions(-)
> > create mode 100644 arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
> > create mode 100644 drivers/media/i2c/rdacm21.c
> >
> > --
> > 2.29.1
> >
>

\
 
 \ /
  Last update: 2020-11-19 15:42    [W:0.244 / U:0.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site