lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v5 2/8] dt-bindings: media: max9286: Document 'maxim,initial-reverse-channel-mV'
    Date
    Document the 'initial-reverse-channel-mV' vendor property in the
    bindings document of the max9286 driver.

    The newly introduced property allows to specifying the initial
    configuration of the GMSL reverse control channel to accommodate
    remote serializers pre-programmed with the high threshold power
    supply noise immunity enabled.

    Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
    Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
    ---
    .../bindings/media/i2c/maxim,max9286.yaml | 23 +++++++++++++++++++
    1 file changed, 23 insertions(+)

    diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
    index 9ea827092fdd..f61234d204fa 100644
    --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
    +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
    @@ -51,6 +51,26 @@ properties:
    '#gpio-cells':
    const: 2

    + maxim,initial-reverse-channel-mV:
    + $ref: '/schemas/types.yaml#/definitions/uint32'
    + minimum: 30
    + maximum: 200
    + default: 170
    + description: |
    + Initial amplitude of the reverse control channel, in millivolts.
    +
    + The initial amplitude shall be adjusted to a value compatible with the
    + configuration of the connected remote serializer.
    +
    + Some camera modules (for example RDACM20) include an on-board MCU that
    + pre-programs the embedded serializer with power supply noise immunity
    + (high-threshold) enabled. A typical value of the deserializer's reverse
    + channel amplitude to communicate with pre-programmed serializers is 170mV.
    +
    + A typical value for the reverse channel amplitude to communicate with
    + a remote serializer whose high-threshold noise immunity is not enabled
    + is 100mV.
    +
    ports:
    type: object
    description: |
    @@ -221,6 +241,7 @@ required:
    - ports
    - i2c-mux
    - gpio-controller
    + - maxim,initial-reverse-channel-mV

    additionalProperties: false

    @@ -243,6 +264,8 @@ examples:
    gpio-controller;
    #gpio-cells = <2>;

    + maxim,initial-reverse-channel-mV = <170>;
    +
    ports {
    #address-cells = <1>;
    #size-cells = <0>;
    --
    2.29.1
    \
     
     \ /
      Last update: 2020-11-16 14:55    [W:2.803 / U:0.396 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site