lkml.org 
[lkml]   [2020]   [Nov]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 7/8] [DNI] arm64: dts: renesas: salvator-x-max9286: Specify channel amplitude
From
Date
Hi Jacopo,

On 16/11/2020 13:53, Jacopo Mondi wrote:
> Use the newly introduced 'maxim,initial-reverse-channel-mV'
> property to specify the initial reverse channel amplitude when
> the remote serializers are pre-programmed with noise immunity threshold
> enabled.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>

Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>



> ---
> arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
> index 6f4798859542..f14a133b7302 100644
> --- a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
> +++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
> @@ -128,6 +128,7 @@ gmsl-deserializer@4c {
> compatible = "maxim,max9286";
> reg = <0x4c>;
> poc-supply = <&poc_12v>;
> + maxim,initial-reverse-channel-mV = <170>;
>
> ports {
> #address-cells = <1>;
> @@ -263,6 +264,7 @@ gmsl-deserializer@6c {
> compatible = "maxim,max9286";
> reg = <0x6c>;
> poc-supply = <&poc_12v>;
> + maxim,initial-reverse-channel-mV = <170>;
>
> ports {
> #address-cells = <1>;
>

\
 
 \ /
  Last update: 2020-11-18 14:43    [W:0.196 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site