lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 8/8] [DNI] arm64: dts: renesas: eagle: Specify channel amplitude
Date
Use the newly introduced 'maxim,initial-reverse-channel-mV'
property to specify the initial reverse channel amplitude when the
remote serializers are not pre-programmed with noise immunity threshold
enabled.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/r8a77970-eagle.dts | 1 +
1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
index 45b947d44cee..75296865104c 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
+++ b/arch/arm64/boot/dts/renesas/r8a77970-eagle.dts
@@ -308,6 +308,7 @@ gmsl: gmsl-deserializer@48 {

/* eagle-pca9654-max9286-pwdn */
enable-gpios = <&io_expander 0 GPIO_ACTIVE_HIGH>;
+ maxim,initial-reverse-channel-mV = <100>;

/*
* Workaround: Hog the CAMVDD line high as we can't establish a
--
2.29.1
\
 
 \ /
  Last update: 2020-11-16 15:10    [W:0.136 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site