lkml.org 
[lkml]   [2020]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 7/8] [DNI] arm64: dts: renesas: salvator-x-max9286: Specify channel amplitude
Date
Use the newly introduced 'maxim,initial-reverse-channel-mV'
property to specify the initial reverse channel amplitude when
the remote serializers are pre-programmed with noise immunity threshold
enabled.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
---
arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi | 2 ++
1 file changed, 2 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
index 6f4798859542..f14a133b7302 100644
--- a/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
+++ b/arch/arm64/boot/dts/renesas/salvator-x-max9286.dtsi
@@ -128,6 +128,7 @@ gmsl-deserializer@4c {
compatible = "maxim,max9286";
reg = <0x4c>;
poc-supply = <&poc_12v>;
+ maxim,initial-reverse-channel-mV = <170>;

ports {
#address-cells = <1>;
@@ -263,6 +264,7 @@ gmsl-deserializer@6c {
compatible = "maxim,max9286";
reg = <0x6c>;
poc-supply = <&poc_12v>;
+ maxim,initial-reverse-channel-mV = <170>;

ports {
#address-cells = <1>;
--
2.29.1
\
 
 \ /
  Last update: 2020-11-16 15:10    [W:0.117 / U:0.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site