lkml.org 
[lkml]   [2013]   [Feb]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 29/35] mfd: ab8500-core: Show turn on status at boot
Date
From: Mattias Wallin <mattias.wallin@stericsson.com>

Several states can be detected when a device is initially turned on.
This patch displays these states in the log. If none of the states
are true, then we report that too.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
---
drivers/mfd/ab8500-core.c | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)

diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 17187c3..153e71e 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1502,6 +1502,15 @@ static int ab8500_probe(struct platform_device *pdev)
"Battery level lower than power on reset threshold",
"Power on key 1 pressed longer than 10 seconds",
"DB8500 thermal shutdown"};
+ static char *turn_on_status[] = {
+ "Battery rising (Vbat)",
+ "Power On Key 1 dbF",
+ "Power On Key 2 dbF",
+ "RTC Alarm",
+ "Main Charger Detect",
+ "Vbus Detect (USB)",
+ "USB ID Detect",
+ "UART Factory Mode Detect"};
struct ab8500_platform_data *plat = dev_get_platdata(&pdev->dev);
const struct platform_device_id *platid = platform_get_device_id(pdev);
enum ab8500_version version = AB8500_VERSION_UNDEFINED;
@@ -1615,9 +1624,26 @@ static int ab8500_probe(struct platform_device *pdev)
} else {
printk(KERN_CONT " None\n");
}
+ ret = get_register_interruptible(ab8500, AB8500_SYS_CTRL1_BLOCK,
+ AB8500_TURN_ON_STATUS, &value);
+ if (ret < 0)
+ return ret;
+ dev_info(ab8500->dev, "turn on reason(s) (%#x): ", value);
+
+ if (value) {
+ for (i = 0; i < ARRAY_SIZE(turn_on_status); i++) {
+ if (value & 1)
+ printk("\"%s\" ", turn_on_status[i]);
+ value = value >> 1;
+ }
+ printk("\n");
+ } else {
+ printk("None\n");
+ }

if (plat && plat->init)
plat->init(ab8500);
+
if (is_ab9540(ab8500)) {
ret = get_register_interruptible(ab8500, AB8500_CHARGER,
AB8500_CH_USBCH_STAT1_REG, &value);
--
1.7.10.4


\
 
 \ /
  Last update: 2013-02-15 15:21    [W:0.304 / U:1.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site