lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 16/20] clk: imx6ul: fix enet1 gate configuration
Date
According to the "i.MX 6UltraLite Applications Processor Reference Manual,
Rev. 2, 03/2017", BIT(13) is ENET1_125M_EN which is not controlling root
of PLL6. It is controlling ENET1 separately.

So, instead of this picture (implementation before this patch):
fec1 <- enet_ref (divider) <---------------------------,
|- pll6_enet (gate)
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´

we should have this one (after this patch):
fec1 <- enet1_ref_125m (gate) <- enet1_ref (divider) <-,
|- pll6_enet
fec2 <- enet2_ref_125m (gate) <- enet2_ref (divider) <-´

With this fix, the RMII reference clock will be turned off, after
setting network interface down on each separate interface
(ip l s dev eth0 down). Which was not working before, on system with both
FECs enabled.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
drivers/clk/imx/clk-imx6ul.c | 7 ++++---
include/dt-bindings/clock/imx6ul-clock.h | 3 ++-
2 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c
index 67a7a77ca540..c3c465c1b0e7 100644
--- a/drivers/clk/imx/clk-imx6ul.c
+++ b/drivers/clk/imx/clk-imx6ul.c
@@ -176,7 +176,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
hws[IMX6UL_CLK_PLL3_USB_OTG] = imx_clk_hw_gate("pll3_usb_otg", "pll3_bypass", base + 0x10, 13);
hws[IMX6UL_CLK_PLL4_AUDIO] = imx_clk_hw_gate("pll4_audio", "pll4_bypass", base + 0x70, 13);
hws[IMX6UL_CLK_PLL5_VIDEO] = imx_clk_hw_gate("pll5_video", "pll5_bypass", base + 0xa0, 13);
- hws[IMX6UL_CLK_PLL6_ENET] = imx_clk_hw_gate("pll6_enet", "pll6_bypass", base + 0xe0, 13);
+ hws[IMX6UL_CLK_PLL6_ENET] = imx_clk_hw_fixed_factor("pll6_enet", "pll6_bypass", 1, 1);
hws[IMX6UL_CLK_PLL7_USB_HOST] = imx_clk_hw_gate("pll7_usb_host", "pll7_bypass", base + 0x20, 13);

/*
@@ -205,12 +205,13 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node)
hws[IMX6UL_CLK_PLL3_PFD2] = imx_clk_hw_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
hws[IMX6UL_CLK_PLL3_PFD3] = imx_clk_hw_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);

- hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet_ref", "pll6_enet", 0,
+ hws[IMX6UL_CLK_ENET_REF] = clk_hw_register_divider_table(NULL, "enet1_ref", "pll6_enet", 0,
base + 0xe0, 0, 2, 0, clk_enet_ref_table, &imx_ccm_lock);
hws[IMX6UL_CLK_ENET2_REF] = clk_hw_register_divider_table(NULL, "enet2_ref", "pll6_enet", 0,
base + 0xe0, 2, 2, 0, clk_enet_ref_table, &imx_ccm_lock);

- hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet_ref_125m", "enet2_ref", base + 0xe0, 20);
+ hws[IMX6UL_CLK_ENET1_REF_125M] = imx_clk_hw_gate("enet1_ref_125m", "enet1_ref", base + 0xe0, 13);
+ hws[IMX6UL_CLK_ENET2_REF_125M] = imx_clk_hw_gate("enet2_ref_125m", "enet2_ref", base + 0xe0, 20);
hws[IMX6UL_CLK_ENET_PTP_REF] = imx_clk_hw_fixed_factor("enet_ptp_ref", "pll6_enet", 1, 20);
hws[IMX6UL_CLK_ENET_PTP] = imx_clk_hw_gate("enet_ptp", "enet_ptp_ref", base + 0xe0, 21);

diff --git a/include/dt-bindings/clock/imx6ul-clock.h b/include/dt-bindings/clock/imx6ul-clock.h
index 79094338e6f1..b44920f1edb0 100644
--- a/include/dt-bindings/clock/imx6ul-clock.h
+++ b/include/dt-bindings/clock/imx6ul-clock.h
@@ -256,7 +256,8 @@
#define IMX6UL_CLK_GPIO4 247
#define IMX6UL_CLK_GPIO5 248
#define IMX6UL_CLK_MMDC_P1_IPG 249
+#define IMX6UL_CLK_ENET1_REF_125M 250

-#define IMX6UL_CLK_END 250
+#define IMX6UL_CLK_END 251

#endif /* __DT_BINDINGS_CLOCK_IMX6UL_H */
--
2.30.2
\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.171 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site