lkml.org 
[lkml]   [2023]   [Jan]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 18/20] ARM: dts: imx6ul: set enet_clk_ref to CLK_ENETx_REF_SEL
Date
IMX6UL_CLK_ENETx_REF is behind of CLK_ENETx_REF_SEL:

FEC MAC <---------- CLK_ENETx_REF_SEL <--------- CLK_ENETx_REF
\
^------<-> CLK_ENETx_REF_PAD

We should point to the clock selector instead. So, we will be able to
use external clock source from CLK_ENETx_REF_PAD as well.

At same time, remove enet_out clk. It is using always the same clock as
enet_clk_ref and do not help to solve any challenges of this HW.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boot/dts/imx6ul.dtsi | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 2b5996395701..fa9afedb6549 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -532,10 +532,9 @@ fec2: ethernet@20b4000 {
clocks = <&clks IMX6UL_CLK_ENET>,
<&clks IMX6UL_CLK_ENET_AHB>,
<&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>,
- <&clks IMX6UL_CLK_ENET2_REF_125M>;
+ <&clks IMX6UL_CLK_ENET2_REF_SEL>;
clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
+ "enet_clk_ref";
fsl,num-tx-queues = <1>;
fsl,num-rx-queues = <1>;
fsl,stop-mode = <&gpr 0x10 4>;
@@ -880,10 +879,9 @@ fec1: ethernet@2188000 {
clocks = <&clks IMX6UL_CLK_ENET>,
<&clks IMX6UL_CLK_ENET_AHB>,
<&clks IMX6UL_CLK_ENET_PTP>,
- <&clks IMX6UL_CLK_ENET_REF>,
- <&clks IMX6UL_CLK_ENET_REF>;
+ <&clks IMX6UL_CLK_ENET1_REF_SEL>;
clock-names = "ipg", "ahb", "ptp",
- "enet_clk_ref", "enet_out";
+ "enet_clk_ref";
fsl,num-tx-queues = <1>;
fsl,num-rx-queues = <1>;
fsl,stop-mode = <&gpr 0x10 3>;
--
2.30.2
\
 
 \ /
  Last update: 2023-03-26 23:39    [W:0.132 / U:2.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site