lkml.org 
[lkml]   [2022]   [Sep]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH-next v1] arm64: dts: rockchip: Enable NVM Express PCIe controller on rock3a
Hi Chukun,

On Mon, 26 Sept 2022 at 23:31, Chukun Pan <amadeus@jmu.edu.cn> wrote:
>
> Hi,
>
> On 26-09-22, 06:14, Anand Moon wrote:
>
> > + pcie30_3v3: gpio-regulator {
> > + compatible = "regulator-gpio";
> > + regulator-name = "pcie30_3v3";
> > + regulator-min-microvolt = <100000>;
> > + regulator-max-microvolt = <3300000>;
> > + gpios = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
> > + gpios-states = <0x1>;
> > + states = <100000 0x0>, <3300000 0x1>;
> > + };
>
> This is actually no different from vcc3v3-pcie regulator?
>
> > +&pcie30phy {
> > + data-lanes = <0 1 2 3>;
> > + phy-supply = <&vcc3v3_pi6c_03>;
> > + status = "okay";
> > +};
>
> It seems that there is no need to define additional data-lanes when
> the pcie3x1 node is not enabled, and phy-supply seems unnecessary on
> this board.
>
As per the schematic below pice support with 2 regulators

VCC3V3_PCIE (SCT2250FPA)
VCC3V3_PI6C_03 (PI6C557-03 is a spread spectrum clock generator
supporting PCI Express and Ethernet requirements)

[0] https://dl.radxa.com/rock3/docs/hw/3a/rock3a_v1.3_sch.pdf

> Excuse me, can you try the patches I posted? Lspci can recognize
> pcie3x2 normally, but I don't have a spare nvme hard drive right
> now to test if it works.
>

No, it did not work on my board, see bool logs.
[0] https://pastebin.com/Lk93VFxg

[ 0.725985] phy phy-fe8c0000.phy.4: lane number 0, val 1
[ 0.726975] phy phy-fe8c0000.phy.4: rockchip_p3phy_rk3568_init: lock
failed 0x6890000, check input refclk and power supply
[ 0.728172] phy phy-fe8c0000.phy.4: phy init failed --> -110
[ 0.728704] rockchip-dw-pcie: probe of 3c0800000.pcie failed with error -110
[ 0.745193] ALSA device list:

Thanks
-Anand

> Thanks, Chukun
>
> ---
> Chukun Pan (3):
> arm64: dts: rockchip: Add regulator suffix to ROCK3 Model A
> arm64: dts: rockchip: Rename pinctrl label of pcie2x1 on rock-3a
> arm64: dts: rockchip: Add PCIe v3 nodes to rock-3a
>
> .../boot/dts/rockchip/rk3568-rock-3a.dts | 36 ++++++++++++++-----
> 1 file changed, 27 insertions(+), 9 deletions(-)
>
> --
> 2.25.1
>

\
 
 \ /
  Last update: 2022-09-27 15:47    [W:0.158 / U:0.548 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site