lkml.org 
[lkml]   [2022]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/3] arm64: dts: rockchip: Rename pinctrl label of pcie2x1 on rock-3a
Date
Am Montag, 26. September 2022, 20:01:01 CEST schrieb Chukun Pan:
> Distinguish it from the pinctrl label of pcie3x2 added later.
> Also added comments to the pcie2x1 node.
>
> Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
> ---
> arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 5 +++--
> 1 file changed, 3 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index 8adf672709e8..1b195355da2a 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -539,8 +539,9 @@ rgmii_phy1: ethernet-phy@0 {
> };
>
> &pcie2x1 {
> + /* M.2 slot */
> pinctrl-names = "default";
> - pinctrl-0 = <&pcie_reset_h>;
> + pinctrl-0 = <&ngffpcie_reset_h>;

please always try to use pin-names as they are in device-schematics.
I.e. if the reset-pin is named pcie_reset_h there, it should stay that way.
Following schematics names makes looking up things way easier.

Heiko

> reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
> vpcie3v3-supply = <&vcc3v3_pcie>;
> status = "okay";
> @@ -582,7 +583,7 @@ pcie_enable_h: pcie-enable-h {
> rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
> };
>
> - pcie_reset_h: pcie-reset-h {
> + ngffpcie_reset_h: ngffpcie-reset-h {
> rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> };
>




\
 
 \ /
  Last update: 2022-10-05 09:49    [W:0.174 / U:1.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site