lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 15/22] firmware: arm_scmi: Add SCMIv3.1 SENSOR_AXIS_NAME_GET support
Date
Add support for SCMIv3.1 SENSOR_AXIS_NAME_GET multi-part command using the
common iterator protocol helpers.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
drivers/firmware/arm_scmi/sensors.c | 82 ++++++++++++++++++++++++++---
1 file changed, 76 insertions(+), 6 deletions(-)

diff --git a/drivers/firmware/arm_scmi/sensors.c b/drivers/firmware/arm_scmi/sensors.c
index e1a94463d7d8..21e0ce89b153 100644
--- a/drivers/firmware/arm_scmi/sensors.c
+++ b/drivers/firmware/arm_scmi/sensors.c
@@ -28,6 +28,7 @@ enum scmi_sensor_protocol_cmd {
SENSOR_CONFIG_SET = 0xA,
SENSOR_CONTINUOUS_UPDATE_NOTIFY = 0xB,
SENSOR_NAME_GET = 0xC,
+ SENSOR_AXIS_NAME_GET = 0xD,
};

struct scmi_msg_resp_sensor_attributes {
@@ -117,13 +118,22 @@ struct scmi_msg_resp_sensor_axis_description {
struct scmi_axis_descriptor {
__le32 id;
__le32 attributes_low;
+#define SUPPORTS_EXTENDED_AXIS_NAMES(x) FIELD_GET(BIT(9), (x))
__le32 attributes_high;
- u8 name[SCMI_MAX_STR_SIZE];
+ u8 name[SCMI_SHORT_NAME_MAX_SIZE];
__le32 resolution;
struct scmi_msg_resp_attrs attrs;
} desc[];
};

+struct scmi_msg_resp_sensor_axis_names_description {
+ __le32 num_axis_flags;
+ struct scmi_sensor_axis_name_descriptor {
+ __le32 axis_id;
+ u8 name[SCMI_MAX_STR_SIZE];
+ } desc[];
+};
+
/* Base scmi_axis_descriptor size excluding extended attrs after name */
#define SCMI_MSG_RESP_AXIS_DESCR_BASE_SZ 28

@@ -393,7 +403,6 @@ iter_axes_desc_process_response(const struct scmi_protocol_handle *ph,
a->extended_attrs = SUPPORTS_EXTEND_ATTRS(attrl);

attrh = le32_to_cpu(adesc->attributes_high);
-
a->scale = S32_EXT(SENSOR_SCALE(attrh));
a->type = SENSOR_TYPE(attrh);
strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
@@ -408,15 +417,69 @@ iter_axes_desc_process_response(const struct scmi_protocol_handle *ph,
scmi_parse_range_attrs(&a->attrs, &adesc->attrs);
dsize += sizeof(adesc->attrs);
}
-
st->priv = ((u8 *)adesc + dsize);

return 0;
}

+static int
+iter_axes_extended_name_update_state(struct scmi_iterator_state *st,
+ const void *response, void *priv)
+{
+ u32 flags;
+ const struct scmi_msg_resp_sensor_axis_names_description *r = response;
+
+ flags = le32_to_cpu(r->num_axis_flags);
+ st->num_returned = NUM_AXIS_RETURNED(flags);
+ st->num_remaining = NUM_AXIS_REMAINING(flags);
+ st->priv = (void *)&r->desc[0];
+
+ return 0;
+}
+
+static int
+iter_axes_extended_name_process_response(const struct scmi_protocol_handle *ph,
+ const void *response,
+ struct scmi_iterator_state *st,
+ void *priv)
+{
+ struct scmi_sensor_axis_info *a;
+ const struct scmi_sensor_info *s = priv;
+ struct scmi_sensor_axis_name_descriptor *adesc = st->priv;
+
+ a = &s->axis[st->desc_index + st->loop_idx];
+ strscpy(a->name, adesc->name, SCMI_MAX_STR_SIZE);
+ st->priv = ++adesc;
+
+ return 0;
+}
+
+static int
+scmi_sensor_axis_extended_names_get(const struct scmi_protocol_handle *ph,
+ struct scmi_sensor_info *s)
+{
+ void *iter;
+ struct scmi_msg_sensor_axis_description_get *msg;
+ struct scmi_iterator_ops ops = {
+ .prepare_message = iter_axes_desc_prepare_message,
+ .update_state = iter_axes_extended_name_update_state,
+ .process_response = iter_axes_extended_name_process_response,
+ };
+
+ iter = ph->hops->iter_response_init(ph, &ops, s->num_axis,
+ SENSOR_AXIS_NAME_GET,
+ sizeof(*msg), s);
+ if (IS_ERR(iter))
+ return PTR_ERR(iter);
+
+ return ph->hops->iter_response_run(iter);
+}
+
static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
- struct scmi_sensor_info *s)
+ struct scmi_sensor_info *s,
+ u32 version)
{
+ int ret;
void *iter;
struct scmi_msg_sensor_axis_description_get *msg;
struct scmi_iterator_ops ops = {
@@ -436,7 +499,14 @@ static int scmi_sensor_axis_description(const struct scmi_protocol_handle *ph,
if (IS_ERR(iter))
return PTR_ERR(iter);

- return ph->hops->iter_response_run(iter);
+ ret = ph->hops->iter_response_run(iter);
+ if (ret)
+ return ret;
+
+ if (PROTOCOL_REV_MAJOR(version) >= 0x3)
+ ret = scmi_sensor_axis_extended_names_get(ph, s);
+
+ return ret;
}

static void iter_sens_descr_prepare_message(void *message,
@@ -559,7 +629,7 @@ iter_sens_descr_process_response(const struct scmi_protocol_handle *ph,
}

if (s->num_axis > 0)
- ret = scmi_sensor_axis_description(ph, s);
+ ret = scmi_sensor_axis_description(ph, s, si->version);

st->priv = ((u8 *)sdesc + dsize);

--
2.32.0
\
 
 \ /
  Last update: 2022-03-30 17:08    [W:0.644 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site