lkml.org 
[lkml]   [2022]   [Mar]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 17/22] firmware: arm_scmi: Use common iterators in Voltage protocol
Date
Make SCMI Voltage protocol use the common iterator protocol helpers.

Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
---
drivers/firmware/arm_scmi/voltage.c | 161 ++++++++++++++++------------
1 file changed, 93 insertions(+), 68 deletions(-)

diff --git a/drivers/firmware/arm_scmi/voltage.c b/drivers/firmware/arm_scmi/voltage.c
index 5d58ba724eeb..e1bdce573c4f 100644
--- a/drivers/firmware/arm_scmi/voltage.c
+++ b/drivers/firmware/arm_scmi/voltage.c
@@ -112,14 +112,100 @@ static int scmi_init_voltage_levels(struct device *dev,
return 0;
}

+struct scmi_volt_ipriv {
+ struct device *dev;
+ struct scmi_voltage_info *v;
+};
+
+static void iter_volt_levels_prepare_message(void *message,
+ unsigned int desc_index,
+ const void *priv)
+{
+ struct scmi_msg_cmd_describe_levels *msg = message;
+ const struct scmi_volt_ipriv *p = priv;
+
+ msg->domain_id = cpu_to_le32(p->v->id);
+ msg->level_index = cpu_to_le32(desc_index);
+}
+
+static int iter_volt_levels_update_state(struct scmi_iterator_state *st,
+ const void *response, void *priv)
+{
+ int ret = 0;
+ u32 flags;
+ const struct scmi_msg_resp_describe_levels *r = response;
+ struct scmi_volt_ipriv *p = priv;
+
+ flags = le32_to_cpu(r->flags);
+ st->num_returned = NUM_RETURNED_LEVELS(flags);
+ st->num_remaining = NUM_REMAINING_LEVELS(flags);
+
+ /* Allocate space for num_levels if not already done */
+ if (!p->v->num_levels) {
+ ret = scmi_init_voltage_levels(p->dev, p->v, st->num_returned,
+ st->num_remaining,
+ SUPPORTS_SEGMENTED_LEVELS(flags));
+ if (!ret)
+ st->max_resources = p->v->num_levels;
+ }
+
+ return ret;
+}
+
+static int
+iter_volt_levels_process_response(const struct scmi_protocol_handle *ph,
+ const void *response,
+ struct scmi_iterator_state *st, void *priv)
+{
+ s32 val;
+ const struct scmi_msg_resp_describe_levels *r = response;
+ struct scmi_volt_ipriv *p = priv;
+
+ val = (s32)le32_to_cpu(r->voltage[st->loop_idx]);
+ p->v->levels_uv[st->desc_index + st->loop_idx] = val;
+ if (val < 0)
+ p->v->negative_volts_allowed = true;
+
+ return 0;
+}
+
+static int scmi_voltage_levels_get(const struct scmi_protocol_handle *ph,
+ struct scmi_voltage_info *v)
+{
+ int ret;
+ void *iter;
+ struct scmi_msg_cmd_describe_levels *msg;
+ struct scmi_iterator_ops ops = {
+ .prepare_message = iter_volt_levels_prepare_message,
+ .update_state = iter_volt_levels_update_state,
+ .process_response = iter_volt_levels_process_response,
+ };
+ struct scmi_volt_ipriv vpriv = {
+ .dev = ph->dev,
+ .v = v,
+ };
+
+ iter = ph->hops->iter_response_init(ph, &ops, v->num_levels,
+ VOLTAGE_DESCRIBE_LEVELS,
+ sizeof(*msg), &vpriv);
+ if (IS_ERR(iter))
+ return PTR_ERR(iter);
+
+ ret = ph->hops->iter_response_run(iter);
+ if (ret) {
+ v->num_levels = 0;
+ devm_kfree(ph->dev, v->levels_uv);
+ }
+
+ return ret;
+}
+
static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
struct voltage_info *vinfo)
{
int ret, dom;
- struct scmi_xfer *td, *tl;
- struct device *dev = ph->dev;
+ struct scmi_xfer *td;
struct scmi_msg_resp_domain_attributes *resp_dom;
- struct scmi_msg_resp_describe_levels *resp_levels;

ret = ph->xops->xfer_get_init(ph, VOLTAGE_DOMAIN_ATTRIBUTES,
sizeof(__le32), sizeof(*resp_dom), &td);
@@ -127,16 +213,7 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
return ret;
resp_dom = td->rx.buf;

- ret = ph->xops->xfer_get_init(ph, VOLTAGE_DESCRIBE_LEVELS,
- sizeof(__le64), 0, &tl);
- if (ret)
- goto outd;
- resp_levels = tl->rx.buf;
-
for (dom = 0; dom < vinfo->num_domains; dom++) {
- u32 desc_index = 0;
- u16 num_returned = 0, num_remaining = 0;
- struct scmi_msg_cmd_describe_levels *cmd;
struct scmi_voltage_info *v;

/* Retrieve domain attributes at first ... */
@@ -161,66 +238,14 @@ static int scmi_voltage_descriptors_get(const struct scmi_protocol_handle *ph,
v->id, v->name,
SCMI_MAX_STR_SIZE);

- cmd = tl->tx.buf;
- /* ...then retrieve domain levels descriptions */
- do {
- u32 flags;
- int cnt;
-
- cmd->domain_id = cpu_to_le32(v->id);
- cmd->level_index = cpu_to_le32(desc_index);
- ret = ph->xops->do_xfer(ph, tl);
- if (ret)
- break;
-
- flags = le32_to_cpu(resp_levels->flags);
- num_returned = NUM_RETURNED_LEVELS(flags);
- num_remaining = NUM_REMAINING_LEVELS(flags);
-
- /* Allocate space for num_levels if not already done */
- if (!v->num_levels) {
- ret = scmi_init_voltage_levels(dev, v,
- num_returned,
- num_remaining,
- SUPPORTS_SEGMENTED_LEVELS(flags));
- if (ret)
- break;
- }
-
- if (desc_index + num_returned > v->num_levels) {
- dev_err(ph->dev,
- "No. of voltage levels can't exceed %d\n",
- v->num_levels);
- ret = -EINVAL;
- break;
- }
-
- for (cnt = 0; cnt < num_returned; cnt++) {
- s32 val;
-
- val =
- (s32)le32_to_cpu(resp_levels->voltage[cnt]);
- v->levels_uv[desc_index + cnt] = val;
- if (val < 0)
- v->negative_volts_allowed = true;
- }
-
- desc_index += num_returned;
-
- ph->xops->reset_rx_to_maxsz(ph, tl);
- /* check both to avoid infinite loop due to buggy fw */
- } while (num_returned && num_remaining);
-
- if (ret) {
- v->num_levels = 0;
- devm_kfree(dev, v->levels_uv);
- }
+ ret = scmi_voltage_levels_get(ph, v);
+ /* Skip invalid voltage descriptors */
+ if (ret)
+ continue;

ph->xops->reset_rx_to_maxsz(ph, td);
}

- ph->xops->xfer_put(ph, tl);
-outd:
ph->xops->xfer_put(ph, td);

return ret;
--
2.32.0
\
 
 \ /
  Last update: 2022-03-30 17:08    [W:0.256 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site